Survey Supplies

The Seco 2 m 2-piece GPS rover rod is 2-meter rod with: • 40-minute circular vial • Vinyl hand grip • Replaceable 5/8 x 11 tip steel point• Rover rod has a fixed-height of 2 meters• Weighs 2.94 lb (1.33 kg)• Fluorescent YellowThe lightweight aluminum two-piece rover rods are perfect for all GPS applications.

The 6 1/2-foot (2 m) Gammon Reel helps you set up and deploy a clean, accurate plumb. Simply draw the bob to the desired position and stop by applying finger pressure; a steel clock spring retracts the string back into the case. Weighs 0.11 lb (0.05 kg).

This 17 foot, graduated SVR features a shorter collapsed length (58-1/2 inches) for more convenient storage. The new sleeker design also features a lighter weight. Case included.

The ML-1 is a high quality magnetic locator with solid tube through construction that provides stability and strength. Whether you're seeking corner markers (iron or steel), well casings, steel drums or septic tank handles, this is the go-to magnetic locator for you. The ML series offers simple one-handed operation with an easy-to-learn keypad featuring only three buttons - no menus or cumbersome instructions to follow. The audio unit has the volume built into the on/off key; just hold down the key while it cycles through the settings. The ML-1 features strong monotube construction, providing structural integrity you can count on.  

The main compartment of this bag is constructed of tough Rhinotek material and designed to hold 24inch stakes or rebar.

The main compartment of this bag is constructed of tough Rhinotek material and designed to hold 18 inch stakes or rebar.

The 25' heavy-duty power tape features a rubberized black and high visibility yellow case with a positive thumb lock and release action. Graduations in 10ths/inches. Length: 25 ft

Crain's durable CR Series Leveling Rods are constructed of non-conductive fiberglass and are rectangular in shape with rounded back corners for a better grip. The scale width is graduated to fill the entire face of the rod and the CR's are equipped with stand-off ribs that protect the scale from wear. Case included.

Laserline's aluminum 10 ft rod in feet/tenths/100ths, plus cut/fill scale. This is a direct reading grade rod with movable tape that collapses to six feet. Case included.

Female 5/8 x 11 with quick release tip. Adds 23.8 mm to length of rod.

This range pole setup includes one 4-foot (1.2 m) sections constructed of heavy-duty 1-1/8-inch (29 mm) aluminum. The sections are electrostaticly powder-coated white and orange. One 4 foot section with an outside diameter of 1.13 in (29 mm). Includes Carrying Bag.

Snap locks into a fixed length of 6 feet. It collapses to 41.5 inches. It's used to elevate a radio antenna to 6 feet plus the height of the tripod setup. Fluorescent Yellow.

The Carbon Fiber Snap Lock Rover Rod features a new one-piece design and two locking systems. This is faster to setup and more user-friendly than traditional rods.

These lightweight two-piece rover rods are perfect for all GPS applications. Features a male 5/8 x 11 tip and 40-minute vial. Rover rod has a fixed-height of 2 meters.

This rod features a new one-piece design. Its faster to set up and more user-friendly compared to traditional two-piece, screw-together rods. Its an ideal rod for all GPS RTK surveys. Perfect for use with the any Trimble Receiver, Juniper Geode or any handheld device with an external antenna.

This adapter adds 76.22 mm to the pole length. Use with #5187-00 GPS Quick-Release Adapter.

The SECO Heads-Up Rod Level gives you the added sense of safety while doing routine surveys in traffic congested areas. uitable for use with track light instruments, robotic instruments, and conventional leveling. The surveyor no longer needs to look down while traffic is flying by. They can simply look through the side window. This allows the users to keep their surveying partner in sight for faster surveying. Due to the unique prismatic design the bubble is direct reading and centered by moving exactly in the direction needed. Suitable for use with track light instruments, robotic instruments, and conventional leveling. The level has a 45-minute sensitivity.  

The Seco Rod Level has a die-cast aluminum body and an adjustable 40-minute vial. It fits round or rectangular rods. Use with track light, robotic instruments, or conventional leveling. The snap-on level fits all poles with a 1-to-1.25-inch diameter. 

Crain's durable CR Series Leveling Rods are constructed of non-conductive fiberglass and are rectangular in shape with rounded back corners for a better grip. Case included.

ChrisNik Surveyor's Tacks - 1lb box (approximately 725 tacks) 3/4" long #14 steel cup tack. Galvanized and sterilized.