This bag is heavily padded for single prisms. Measures (interior*) 5 x 7 x 2 in (12.7 x 17.8 x 5.1 cm)

This system tilts and slides up and down pin poles Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder Site cones double as locks The prism has a 40-minute adjustable vial The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads A system bag is also included Weighs 1.40 lb (0.63 kg)

SECO Smart Phones Cradle Assembly.

This rod features a new one-piece design. Its faster to set up and more user-friendly compared to traditional two-piece, screw-together rods. Its an ideal rod for all GPS RTK surveys. Perfect for use with the any Trimble Receiver, Juniper Geode or any handheld device with an external antenna.

Features a die-cast aluminum body and an adjustable vial Fits round or rectangular rods Suitable for use with track light, robotic instruments, or conventional leveling The snap-on level fits all poles with a 1 to 1.25 inch diameter Feature a 40 minute sensitivity Weighs 0.10 lb (0.04 kg)

Comes with pockets that holds a folding ruler, a pocket with Velcro safety strap, two large marker pens, and other pens, pencils, etc. The holder is made of strong 1000D nylon which resists tears and abrasions.

The Seco Rod Level has a die-cast aluminum body and an adjustable 40-minute vial. It fits round or rectangular rods. Use with track light, robotic instruments, or conventional leveling. The snap-on level fits all poles with a 1-to-1.25-inch diameter. 

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products Weighs 0.15 lb (0.07 kg)

The SECO raised shiner is a 1-5/16-inch (33-mm) diameter disk with a raised 1-1/8-inch (29-mm) center. Includes 260 shiners per box.

This 25 foot, graduated SVR features a shorter collapsed length (58-1/2 inches) for more convenient storage. The new sleeker design also features a lighter weight. Case included.

Brackets are needed to attach laser sensors to the SVR rod Top brackets are available for all popular laser receiver models Designed for Apache Storm® Laserometer® HL700/750 Weighs 0.20 lb (0.09 kg)

This rubber ball is used as a pin cushion for holding stake tacks.

The rubber balls are used as a pin cushion for Standard 3/4" Stake Tacks. Features a built-in belt loop.

The Mini Bipod utilizes the same design concepts as the popular 5217-04 bipod, just shorter 1-to-1.25 inch (25.4-to-31.8 mm) diameter poles attach easily through the open clamp 1.5 inch (3.81 cm) outside diameter poles can be loaded through the top Collapses to 25 inches (63.5 cm) and extends to 35 inches (88.9 cm) Flo Yellow Weighs 3.50 lb (1.60 kg)

Tilting pivot allows measurement on sloped or flat pipe surfaces Standard topo shoe length, 3.375-inch (85.7-mm), compatible with all SECO Poles 2-inch (50.8-mm) diameter chrome-plated steel housing with grade-8 ceramic magnet ring Magnet has 40 pounds of pull force on 3/8-inch (9.5-mm) clean steel plate Black anodized machined 6061 aluminum body Machined brass pole connecter with female 5/8 x 11 threads Weighs 0.55 lb (0.25 kg)

Adjustable 6 inch (152 cm) Black and White tilting target, for affixing to pole top and used in multiple survey jobs. Contrasting 6″ (152mm) Black and White pattern Matte non-glare target material Adjustable tilting axis Anodized aluminum yoke and target plate Axis height 135mm 5/8-11 threaded base Weight 0.90 lbs, 0.41kg

This combo allows easy conversions from “control” to “topo” surveys The quick-release pin and matched drill holes are the key Aluminum point weighs 0.15 lb (0.07 kg) Aluminum topo shoe weighs 0.20 lb (0.09 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo-driven and robotic total stations, 3-D laser scanners or construction lasers The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point A retaining system—which prevents leg kick out and accidental falls on slick surfaces—is stored on the inside of the leg and can be left in place when the tripod is not in use The large ‘footbed’ is there to facilitate solid planting for stability The shape and size of the foot are designed to allow for a solid placement on any terrain The foot is equipped with a replaceable point and a retention loop for use with a safety strap The Tri-Max can handle equipment up to 65 lb (30 kg) Quick Clamp Lock type Fiberglass Legs, black Hardware Extends 71 in (1.8 m) Collapses 44.5 in (113 cm) Weighs 17.00 lb (7.70 kg)

This padded carrying case for tribrachs has a heavy-duty zipper, dust flaps and nylon carrying straps.

This lightweight magnetic mount system adapts easier to curved surfaces Features a 5/8 x 11 adapter allows for quick setups Weighs 4.15 lb (1.88 kg)