SECO’s Heavy-Duty Column Clamp has a solid stable design and works with all 5/8 x 11 instruments The adjustable column rotates and moves vertically to orient the instrument when needed and features 12-inches (30.48 cm) of height adjustment Includes a 2-inch (5.08 cm) by 10 ft (3.05 m) strap rated for a 2200 pound load and a heavy duty ratchet to create a strong connection to both round and square columns The centerline of the 5/8 x 11 stud to column measures 15 inches (38.1 cm) Constructed of structural aluminum for industrial applications and stainless steel hardware Weighs 13.75 lb (6.24 kg)

The 6' Rhino heavy duty fiberglass folding ruler has waterproof fiberglass construction which prevents common problems that occur with wood rulers such as fading, splintering, and chipping. It outlasts wood rulers four-to-one. Engraved graduations resist weather and scratches. Easy-to-fold locking joints are tighter than traditional folding rulers made of wood. This allows more accurate measurement along the length of the ruler. Rhino ruler - 10ths & inches,

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs Features a built-in circular vial in the instrument head and safety chains on the legs to prevent slipping on hard surfaces The telescopic Aluminum (Round) legs allow for setup to extend 91.2 in (2.32 m) Featuring a Quick Clamp lock and an Elevator/Round head Collapses to 4.26 ft (1.26m) Will fit in tripod carrying bag 8154-12 Black Hardware Weighs 16.30 lb (7.39 kg)

Carries up to 50 lath or rebar 1000 denier Cordura® bag has a thick, reinforced bottom of leather and the Rhinotek™ abrasive-resistant materials The exterior features a hammer loop, paint can holder, marker pen slots, and a pocket for miscellaneous gear Dimensions: 9 x 38 inches (2.54 x 96.52 cm) Weighs 0.22 lb (0.10 kg)

The heavy-duty power tape features a rubberized black and high visibility yellow case with a positive thumb lock and release action. Graduations in 10ths. Length: 25 ft

The 33' heavy-duty power tape features a rubberized black and high visibility yellow case with a positive thumb lock and release action. Graduations in 10ths. Length: 33 ft

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms Converts a robotics pole to a GPS pole Weighs 0.26 lb (0.12 kg)

The jumbo triple prism bag is designed to carry one triple prism assembly with targets or tribrachs. It measures 9 x 9 x 5 in (23 x 18 x 6 cm).

Level Vial assembly fits most 8ft & 12ft Prism Rods Assembly is for 1.25-inch diameter poles Featuring a 40-minute vial (#D11242) Top Adjusted Vial Holder Assembly Includes screws Weighs 0.14 lb (0.06 kg)

This 5-section aluminum leveling rod is made of a light and durable alloy The telescopic sections are anodized and silk-screened with moisture-resistant ink Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side The rod is 16 ft in length and the graduations are in inches Each rod includes a special level and protective bag Weighs 3.50 lb (1.60 kg)

This point features an anodized aluminum body and an easy-to-replace steel point.

Features an anodized aluminum body Easy-to-replace steel point Sharp Point Weighs 0.16 lb (0.07 kg)

SECO LR-PRO-25' Complete Lock Set.

Features a male 5/8 x 11 thread Aluminum body Easy-to-replace steel point Weighs 0.18 lb (0.07 kg)

6-5/8-inch flat head with large center hole (2-5/8-inch) to facilitate an easy set-up over a point Foot is equipped with a replaceable point made of hardened steel Dual Locks (Quick Clamp and Screw Clamp) Standard 5/8 x 11 threaded brass instrument stud Yellow fiberglass legs, orange aluminum hardware Snap cap to protect tripod head Comes with shoulder strap for comfortable carrying over longer distances Made in North America under strict quality controls Extends 70.75 inches (179 cm) Collapses 43.75 inches (111 cm) Weighs 13.60 lb (6.16 kg)

Features dual grads (0.01 ft/cm), adjustable tip and TLV™ lock including 40-minute vial on the lock Extends to 5.10 ft (1.55 m) Collapses to 2.70 ft (0.82 m) Prism Height 115 cm Color: Red Weighs 2.30 lb (1.04 kg)

The Mini Prism Monopod Kit forms a stable base with your 6000-Series Mini Prism (sold separately) The kit is easy to set up and can be used by just one person Ideal for: construction surveys, inspections, asbuilts, and many other applications Add a standard 5/8 x 11 extension to the kit to achieve heights to 4 feet Weighs 2.25 lb (1.02 kg)

Replacement point for Mini Prism Weighs only 0.03 lb (0.01 kg)

Extends to 4.80 ft (1.5 m) and collapses to 2.26 ft (0.7 m) Dual graduations: tenths and mm increments Constructed of sturdy aluminum Quick-Release Lock and 40 minute vial Weighs 2.33 lb (1.80 kg)

Mini Stakeout Pole. Measures 1.28 feet (0.39 m) and 5/8 x 11 Threads. Red.