Batteries/Chargers/Cables

Trimble R10, R12 and R12i Rechargeable Battery (7.4V, 3700 mAHr, 27.3 Wh). A smart lithium-ion battery inside the Trimble R10/R12/R12i system delivers extended battery life and more reliable power. A built-in LED battery status indicator allows you to quickly check the remaining battery life.

2 pack of TSC7 rechargeable batteries with LED charge indicator.

Li-Ion Rechargeable Battery 7.2V, 2200 mAHr battery for use with the Trimble R2 / R8 / R8s / R780 GNSS receivers and the MT1000.

The TSC7 external Battery Charger with international power cord and two batteries.The charger recharges one set of 2 batteries for the TSC7 controller.

This cable provides power and data between your Trimble TDL 450 & Pacific Crest TDL 450, ADL 450, HPB, PDL, XDL, RFM-96, high power base radio and your R10, R8S, R8 series, R7, 5700, 5800, 4800, 4700 and Epoch 35 & 50 receivers. 7 pin #0 Lemo to 5 pin #1 Lemo - SAE Power connector on 5 pin #1 Lemo end. This cable is 12 ft. Long. Part Number 66656-10 cable is NOT compatible with the TDL450B radio and can damage the TDL450B unit!

Connects your Trimble TDL450 / HPB450 / PacCrest PDLradio to a 12V car battery. SAE to alligator clips. Cable is 6ft in length.

Trimble T10 Battery Pack, enhanced capacity. Li-Ion, 11.4V / 8000mAH. Dimensions: 123x147x18.4mm.

Trimble R10/R12/R12i Accessory - NMO to SMA Radio Antenna Cable, 5m (for 450 MHz antenna)

Compatible with entire S- Series (S3, S5, S6, S7, S8, S9, SX10 plus Focus 30, RTK, SPS) and VX Robotic Total Stations. Single Trimble Lithium-ion 11.1V 6500mAH 55.5Wh Instrument Battery.

Trimble TSC3 Accessory - Rechargeable Li-Ion Battery incl. Battery Door

Power supply and 6 foot power cord for Trimble dual slot battery charger. Power supply and cord only, Trimble dual slot battery charging cradle not included. If you need Trimble dual slot battery charging cradle, order SKU 101070-00-01 (cradle and power supply).

7P Lemo to SAE, 0.6m / SAE to Battery Clips, 1.8m for the Trimble R10 / R12 / R12i GPS receivers.

Composed of TNC Right Angle and a TNC Straighton 20 FT of RG-58 cable. Geospace Technologies.

International AC Power Adapter Charger Kit (includes 45W wall charger (58X46X28mm) with USB-C PD female port, NA plug with regional adapters (EU,UK,SAA), and a USB-C (male) to USB-C (male) cable for charging and data transfer - 5 Pack. The cable can be connected to the AC Adapter and TSC5 for charging, or from TSC5 controller to a computer for data transfer.

Use the Trimble T100 Tablet Ac Adapter And Cord Power Supply Kit to recharge your battery pack. The kit contains an AC adapter cable with wall plugs for the US, Europe, UK, and Australia/New Zealand.

Trimble dual slot battery charging cradle, power supply and cord, 2 battery slot insert-convertors for the Trimble S3, S5, S6, S7, S8, S9, SX10, SX12 and VX Robotic Total Station batteries and the Trimble GPS GNSS Receiver Batteries for 5700, 5800, R2, R7, R8, R8s R10, R12, R12i AND MT1000. For Trimble GNSS receiver batteries (89840-00 and 92670).

Connects your R6 / R8 / R10 / R12 / R12i GPS receiver to a 12V car battery. 7pin lemo to alligator clips. 10 feet long.

Battery Charging Kit for Trimble T10 Tablet - Single Battery, includes power cord.

This AC adapter has all international connectors included. It is for the TSC7 controller and the external battery charger.