Cables

Converts a TNC connector to an antenna mount for your Trimble TM3/HPB450 Radio whip antenna.

This cable provides power and data between your Trimble TDL 450 & Pacific Crest TDL 450, ADL 450, HPB, PDL, XDL, RFM-96, high power base radio and your R10, R8S, R8 series, R7, 5700, 5800, 4800, 4700 and Epoch 35 & 50 receivers. 7 pin #0 Lemo to 5 pin #1 Lemo - SAE Power connector on 5 pin #1 Lemo end. This cable is 12 ft. Long. Part Number 66656-10 cable is NOT compatible with the TDL450B radio and can damage the TDL450B unit!

7P Lemo to SAE, 0.6m / SAE to Battery Clips, 1.8m for the Trimble R10 / R12 / R12i GPS receivers.

Connects your Trimble TDL450 / HPB450 / PacCrest PDLradio to a 12V car battery. SAE to alligator clips. Cable is 6ft in length.

Trimble R10/R12/R12i Accessory - NMO to SMA Radio Antenna Cable, 5m (for 450 MHz antenna)

Composed of TNC Right Angle and a TNC Straighton 20 FT of RG-58 cable. Geospace Technologies.

Replacement/spare for the standard USB cable for connecting DA2 to USB-A power supplies.

Connects your R6 / R8 / R10 / R12 / R12i GPS receiver to a 12V car battery. 7pin lemo to alligator clips. 10 feet long.

6pin hirose to USB.

SMA Male to TNC Female Adapter - RFA8482P

Geospace TNC Right Angle to TNC Straight GPS Radio Antenna Cable  - 2 Feet

The USB 3.1 USB-C to USB-A adapter is a T100 accessory which is also compatible with TSC5.

USB 3.1 Type-A (male) to USB-Type-C (male) data transfer cable (3 feet).

USB Data Cable (mini usb), 3 foot, fits a Geo7x, a TSC3, and a Trimble Nomad with Mini-USB connections on them. Connect your devices with USB mini B connector using this USB 2.0 A Male to USB Mini-B Male Cable from Monoprice. This cable features a standard USB A male connector on one end and a 5-pin mini B connector on the other. It uses 28AWG conductors and is shielded using braid and foil shields.

Trimble cable connects your Trimble S- Series total stations - S3, S5, S6, S7, S8, S9, SX10 and VX - to a 12V car battery. 6pin hirose to alligator clips.

Nikon cable connects your Nikon total station to your TSC3/TSC2/TSCe/Recon/Nomad data collector 9-Pin to Nikon Total Station VIA the RS232 Serial Port connection.

Trimble Serial Data Cable.