Leveling & Grade Rods

Laserline Replacement Tape - 10 foot - 10ths/100ths for Laserline 10' Direct Reading Rods. Heavy-duty matte textured face makes tape easy to read in bright sunlight and protects numbers from wear and fading with heavy-duty brass tape lock grommets are oversized, minimize tape tearing Measurement: 10ths/100ths

The Seco Rod Level has a die-cast aluminum body and an adjustable 40-minute vial. It fits round or rectangular rods. Use with track light, robotic instruments, or conventional leveling. The snap-on level fits all poles with a 1-to-1.25-inch diameter. 

This 5-section aluminum leveling rod are made of a light and durable alloy The telescopic sections are anodized and silk-screened with moisture-resistant ink Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side The rod is 16.4 ft length and uses 10ths graduations Each rod includes a special level and protective bag Weighs 3.50 lb (1.60 kg)

Crain's durable CR Series Leveling Rods are constructed of non-conductive fiberglass and are rectangular in shape with rounded back corners for a better grip. The scale width is graduated to fill the entire face of the rod and the CR's are equipped with stand-off ribs that protect the scale from wear. Case included.

Features a new shorter collapsed length 58.5 inches and a lighter weight Constructed of strong, rigid fiberglass with reinforcing ribs for added stability Waterproof and nonconductive The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant Tight locking mechanism features round buttons that resist jamming from sand and dirt Features a 1/4 x 20 female adapter in top section Dual Graduations 8ths/10ths Includes carrying case (#91411) Length 25 ft Weighs 6.00 lb (2.72 kg)

Brackets are needed to attach laser sensors to the SVR rod Top brackets are available for all popular laser receiver models Designed for Apache Storm® Laserometer® HL700/750 Weighs 0.20 lb (0.09 kg)

Features a new shorter collapsed length 58.5 inches and a lighter weight Constructed of strong, rigid fiberglass with reinforcing ribs for added stability Waterproof and nonconductive The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant Tight locking mechanism features round buttons that resist jamming from sand and dirt Features a 1/4 x 20 female adapter in top section Graduations 8ths Includes carrying case (#91411) Length 25 ft Weighs 6.00 lb (2.72 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping Scale width graduated to fill the entire face of the rod, Measuring scale on the back side that allows for overall height readings Special molded stand-off ribs protect the scales from wear Made with strong fiberglass, which is waterproof and corrosion-resistant CR Rod series is non-conductive Perfect for laser detector mounting with no special brackets required Two section rod Collapsed length is 52 inches (1.32 m) Graduations in inches Length 8 ft Weighs 3.00 lb (1.36 kg)

This 5-section aluminum leveling rod is made of a light and durable alloy The telescopic sections are anodized and silk-screened with moisture-resistant ink Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side The rod is 16 ft in length and the graduations are in inches Each rod includes a special level and protective bag Weighs 3.50 lb (1.60 kg)

This 4-section aluminum leveling rod are made of a light and durable alloy The telescopic sections are anodized and silk-screened with moisture-resistant ink Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side The rod is 13.12 ft in length and uses 10ths graduations Each rod includes a special level and protective bag Weighs 3.10 lb (1.40 kg)

DiNi Levelling Rod LD 24, 4/1m, Folding, Code & E-Graduation

Trimble 4m metal telescoping rod with bar-code graduation on front surface. Extendable in steps, 4 sections and a circular bubble. Weight 1.8 kg

Laserline's aluminum 10 ft rod in feet/tenths/100ths, plus cut/fill scale. This is a direct reading grade rod with movable tape that collapses to six feet. Case included.

Crain's durable CR Series Leveling Rods are constructed of non-conductive fiberglass and are rectangular in shape with rounded back corners for a better grip. Case included.

Laserline GR10i 10' Direct Reading Grade Rod Optical, Feet/8ths

Laserline Mfg. Inc. is the world's largest manufacturer of direct reading (Lenker style) grade rods, which feature a movable tape face allowing you to set the actual benchmark elevation, or any elevation, above or below the bench into the rod. Laserline detector brackets attach to the special rail slide on laser grade rods. Made of rugged, lightweight extruded aluminum with a black anodized finish. 

Laserline Carrying / Storage Bag features sturdy black cordova nylon with strap, velcro flap and pocket for bracket and detector. 15-foot (5-meter).

This bipod features a special head that will hold a rectangular rod The head will fit rods with widths between 1.57 and 2.56 inches Flo Orange Weighs 4.00 lb (1.82 kg)

The Gardner Rod rest is a self-retracting ‘kickstand’ for survey rods Attaches quickly with one thumbscrew and is activated by simply pushing down a few inches on the handle Legs self-retract when the rod is lifted Made of durable anodized aluminum that won’t rust or fatigue and has a stainless steel clamp screw Holds the rod at a 20-degree zenith angle 1.25 inch Outside Diameter Weighs 1.55 lb (0.70 kg) Pole not included

Features a die-cast aluminum body and an adjustable vial Fits round or rectangular rods Suitable for use with track light, robotic instruments, or conventional leveling The snap-on level fits all poles with a 1 to 1.25 inch diameter Feature a 40 minute sensitivity Weighs 0.10 lb (0.04 kg)