Prisms

Mount a standard survey prism to your SVR or CR Grade Rod 5/8 x 11 thread with 1/4 x 20 stainless tip Weighs 0.15 lb (0.07 kg)

Maintain target lock with confidence using Trimble Active Tracking technology and selecting from 8 different channels. This target can also work as a passive 360 prism. Target height - Trimble Standard - 135mm. Prism Constant: +10mm Trimble MultiTrack Target Prism, including 7.4V Li-Ion battery Active Tracking Diodes Prism Constant: 10mm Prism Accuracy: 5" Prism Size: 20mm Tracker Range: 800m

This steel body replacement point fits prism poles with 5/8 x 11 male threads on the bottom of the pole. 3.37 inch steel body.

The assembly features a 25 mm copper-coated prism, for fog prevention, a tilting holder, with friction axis, zero or -30 mm offset. It's powder painted a fluorescent orange or yellow with fluorescent yellow targets and includes a 40-min adjustable circular vial on the side.

Trimble 360 Degree Mini Prism. 0.5'' (12.7mm) for RMT 606 / 604. Prism constant: +2mm

This one-section pole is wear-resistant. The soft rubber knob is easy to tighten or loosen, even when wearing gloves. TLV lock features a convenient 40-minute vial built into the lock.

Delrin 1-inch pole clamp adapter expands OD to 1.25 inches for a secure fit and wider accessory compatibility—durable, lightweight, easy to install.

The heavy-duty 62 mm silver-coated prism is sealed in a strong canister with an ‘O’ ring to prevent water and dust from getting inside Target Size is 6 x 9 inch Target Colors are Flo Orange with Black Weighs 1.75 lb (0.79 kg)

Reflective Retro Target, 50mm x 50mm (10 Pack).

Reflective Target - 3" x 3" - Yellow.

This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target (-30 mm offset) Two on-board 130-minute vials — top and bottom Includes replaceable plumb bob point Flo Orange Weighs 0.62 lb (0.28 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Quick-Release cradles plug directly into Quick-Release Pole Clamps Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute vial built on to the clamp The Delrin Adapter can be purchased seperately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.38 lb (0.17 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard 1.25 inch OD rods and poles Includes Quick Release and Battery Slot Weighs 0.46 lb (0.21 kg)

Incorporates a simple stainless steel locking mechanism that’s easy to set while adjusting the prism and target tilt The heavy-duty 62 mm silver-coated prism is sealed in a strong canister with an ‘O’ ring to prevent water and dust from getting inside The prism can be mounted in either 0 or -30 mm offset positions Tilting axis height is 115 mm 5.5 x 7-inch Target size Target Color is Flo Orange with Black Weighs 1.59 lb (0.72 kg)

This assembly is for 1.50-inch diameter poles Features the 40-minute vial (#D11232) Includes screws Weighs 0.19 lb (0.09 kg)

Adapt the thread size to 5/8 x 11 for mounting prisms on the leveling rod’s female adapter Weighs 0.20 lb (0.09 kg)  

Male and female 5/8 x 11 threads Physical height is 117 mm Center height is 265 mm with 230 mm Sphere (6704-001) and Tribrach Adapter (2070-00) Weighs 0.36 lb (0.16 kg)

3.37 inch steel body, removable point Weighs 0.30 lb (0.14 kg)

Tilting pivot allows measurement on sloped or flat pipe surfaces Standard topo shoe length, 3.375-inch (85.7-mm), compatible with all SECO Poles 2-inch (50.8-mm) diameter chrome-plated steel housing with grade-8 ceramic magnet ring Magnet has 40 pounds of pull force on 3/8-inch (9.5-mm) clean steel plate Black anodized machined 6061 aluminum body Machined brass pole connecter with female 5/8 x 11 threads Weighs 0.55 lb (0.25 kg)

This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target Two on-board 130-minute vials — top and bottom Includes replaceable plumb bob point 0 and -30 mm Offset Flo Yellow Weighs 0.62 lb (0.28 kg)