Accessories

Trimble R10/R12/R12i Accessory - NMO to SMA Radio Antenna Cable, 5m (for 450 MHz antenna)

Trimble R10/R12/R12i Quick Release Adapter (0.05m). For simple and safe removal of the receiver from the range pole. The quick release adaptor ensures a solid, stable connection between the range pole and receiver.

This point features an anodized aluminum body and an easy-to-replace steel point.

Compatible with entire S- Series (S3, S5, S6, S7, S8, S9, SX10 plus Focus 30, RTK, SPS) and VX Robotic Total Stations. Single Trimble Lithium-ion 11.1V 6500mAH 55.5Wh Instrument Battery.

Trimble T10 Battery Pack, enhanced capacity. Li-Ion, 11.4V / 8000mAH. Dimensions: 123x147x18.4mm.

Connects your Trimble TDL450 / HPB450 / PacCrest PDLradio to a 12V car battery. SAE to alligator clips. Cable is 6ft in length.

Trimble TSC3 Accessory - Rechargeable Li-Ion Battery incl. Battery Door

Snap locks into a fixed length of 6 feet. It collapses to 41.5 inches. It's used to elevate a radio antenna to 6 feet plus the height of the tripod setup. Fluorescent Yellow.

Power supply and 6 foot power cord for Trimble dual slot battery charger. Power supply and cord only, Trimble dual slot battery charging cradle not included. If you need Trimble dual slot battery charging cradle, order SKU 101070-00-01 (cradle and power supply).

7P Lemo to SAE, 0.6m / SAE to Battery Clips, 1.8m for the Trimble R10 / R12 / R12i GPS receivers.

Composed of TNC Right Angle and a TNC Straighton 20 FT of RG-58 cable. Geospace Technologies.

Trimble Unity Gain Radio Antenna, 450-470MHZ For use with HPB450, TDL450 and Trimmark III Radios.

Trimble Cordura Pouch can hold a 6ft antenna mounting pole, whip antenna and a mounting washer.

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products Weighs 0.15 lb (0.07 kg)

Steel mount plate with adhesive backing to connect a handheld or tablet device to the magnets on the handle. Purchase as a replacement or if you want to use the handle on more than one device or multiple locations on the same device.

The SECO Wide Base Topo Shoe measures 3.37 inches in length and features a steel body that measures 2.5 inches (64 mm) outside diameter.

The open clamp attachment allows quick and easy connection to the pole. Will connect to 19- and 32-mm diameter poles. The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar.

The bag holds 48inch lath and features a sturdy, adjustable shoulder strap and hand loop to carry the load.

Upgrade the plastic release lever on your TSC7 pole bracket mount with this heavy duty metal clip. The factory lever is plastic and prone to failure.