Bipods/Tripods/Tribrachs/Adapters

Open Clamp Bipod allows a surveyor to set up a freestanding GPS antenna pole or prism pole 1-to-1.25 inch (25.4-to-31.8 mm) outside diameter. Legs extend to 6 feet (1.8 m) for use in uneven terrain.

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products Weighs 0.15 lb (0.07 kg)

The SECO Wide Base Topo Shoe measures 3.37 inches in length and features a steel body that measures 2.5 inches (64 mm) outside diameter.

This Seco tribrach features a twist-focus (2.5X mag.) and leveling screws with center line. It has an 8-min vial, 3-prong forced centering and a 5/8 x 11 base.

This tripod features a collapsible center staff with twist locking mechanism that rotates 360; to check calibration of plumbing with a 8-minute vial, and quick release; twist locking mechanisms on the legs. It is dual graduated and adjusts to three heights: 2 m, 1.8 m, and 1.5 m.

The Thumb-Release Tripod uses the same thumb action release and lock mechanism as the popular Thumb-Release Bipod 1-to-1.5 inch (25.4-to-38.1 mm) outside diameter poles thread easily through the open clamp on top The legs (independently) extend to 6 ft (1.8 m) and collapse to 43 in (109 cm) Fluorescent Yellow Weighs 6.00 lb (2.60 kg)

SECO Tribrach / GPS Tripod Removable Plug Adapter - Brass Center.

This combo allows easy conversions from “control” to “topo” surveys The quick-release pin and matched drill holes are the key Aluminum point weighs 0.15 lb (0.07 kg) Aluminum topo shoe weighs 0.20 lb (0.09 kg)

6-5/8-inch flat head with large center hole (2-5/8-inch) to facilitate an easy set-up over a point Foot is equipped with a replaceable point made of hardened steel Dual Locks (Quick Clamp and Screw Clamp) Standard 5/8 x 11 threaded brass instrument stud Yellow fiberglass legs, orange aluminum hardware Snap cap to protect tripod head Comes with shoulder strap for comfortable carrying over longer distances Made in North America under strict quality controls Extends 70.75 inches (179 cm) Collapses 43.75 inches (111 cm) Weighs 13.60 lb (6.16 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms Converts a robotics pole to a GPS pole Weighs 0.26 lb (0.12 kg)

The LaserLine B-Storm Detector Bracket is lightweight and durable with its extruded aluminum construction. Its surface is coated with a black anodized finish. It holds the laser detector securely in place for accurate measurement. The LaserLine B-Storm Detector Bracket also provides faster and easier reading when attached to a special rail in LaserLine’s GR1000 and GR1450 models. It eliminates the need to loosen and tighten the detector to be able to move it. This detector bracket is compatible with the following laser receiver models: Spectra Precision HL700, 750, Spectra Precision HL450 Spectra Precision HL760 Apache Storm Futtura CR4 Leica Rod Eye Digital

This adapts retro prisms to Swiss-style tribrachs Includes a removable Zeiss plug and locking screw Fits all tribrachs Weighs 1.75 lb (0.80 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs. The telescopic Aluminum (Round) legs allow for setup to extend to 65 in (1.60 m). Features a quick clamp and a triangle/flat head tripod. Weighs 7.45 lb (3.38 kg).

Suitable for: Total stations Robotic total stations Digital levels Theodolites Heavy-duty rotating lasers Features: Wooden parts made of finest European hard wood Plastic-coated wooden legs for utmost durability Large round tripod head made of aluminum, powder-coated Dual clamp: quick release and screw clamp Break-proof quick release levers, made of aluminum Snap Cap Brass hinge pins for extra stability Tripod shoes made of aluminum w/ replaceable steel points Carrying strap In accordance with ISO 12858-2-H Strapless-Go: Retract-and-go transport locking system

Crain Tri-Max Complete Retainer Bell and Assembly Replacement. Includes Loctite 242 threadlocker and complete assembly instructions.Replaces P/N 91750 and 91751.

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point A retaining system—which prevents leg kick out and accidental falls on slick surfaces—is stored on the inside of the leg and can be left in place when the tripod is not in use The large ‘footbed’ is there to facilitate solid planting for stability The shape and size of the foot are designed to allow for a solid placement on any terrain The foot is equipped with a replaceable point and a retention loop for use with a safety strap The Tri-Max can handle equipment up to 65 lb (30 kg) Dual Clamp Lock type Black Hardware, Fiberglass Legs Extends 71 in (1.8 m) Collapses 44.5 in (113 cm) Weighs 17.00 lb (7.70 kg)

Designed to provide the extra stability required when working indoors on concrete and other hard surfaces Made of heavy-duty aluminum and measures 35 x 35 x 35 inches Collapses for compact storage The rubber O-ring fits over the foot of the tripod for extra stability Weighs 3 lb (1.36 kg) Works with any style of tripod; tripod pictured is for illustration only

The rotating friction-top adapter allows the prism to be pointed after installation in the tribrach. Fits all tribrachs.

The Mini Bipod utilizes the same design concepts as the popular 5217-04 bipod, just shorter 1-to-1.25 inch (25.4-to-31.8 mm) diameter poles attach easily through the open clamp 1.5 inch (3.81 cm) outside diameter poles can be loaded through the top Collapses to 25 inches (63.5 cm) and extends to 35 inches (88.9 cm) Flo Yellow Weighs 3.50 lb (1.60 kg)