Building Construction - Accessories

Features ‘site cones’ that improve vertical angle pointing — the site cones double as tilting-axis lock knobs The adjustable 40-min vial is mounted on the front side and is easy to see and simple to adjust This mini-prism is a zero-offset if you reverse the prism. Includes carrying case Flo Orange Weighs 0.30 lb (0.14 kg)

This system tilts and slides up and down pin poles Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder Site cones double as locks The prism has a 40-minute adjustable vial The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads A system bag is also included Weighs 1.40 lb (0.63 kg)

Laser Technology's (LTI) 4 foot (1.25m) Tripod - 1/4-20 Mount.

These are designed so the GPS surveyor has all the features needed in a single rod, they’re ideal for kinematic surveys Zero height (0 H.T.) Carbon fiber makes these rods 30% lighter Included pin that locks the length of the rod at set points Locking Length 1.8 m, 2 m, 2.2 m TLV™ locking mechanism includes a 40-minute vial built in Dual graduation (10ths/cm) inner pole Length 4.48 ft – 8.14 ft (1.4 m – 2.5 m) Weighs 2.27 lb (1.03 kg)

Many find these rover rods are faster to setup and more user-friendly than traditional rods Features include a one-piece design and two locking systems for stability, the snap lock prevents slippage and the compression lock centers the telescopic inner pole and maintains straightness External “GT” Graduations (10ths/100ths) The rod telescopes, locks at 2 meters, and collapses back to 1.354 meters The lightweight aluminum rods come with a 40-minute via Hardware is Flo Yellow Weighs 2.35 lb (1.07 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs The telescopic Aluminum (Round) legs allow for setup Extends to 65 in (1.65 m) Features a Quick Clamp lock type with a Triangle/Flat head Tripod Hardware comes in Orange Weighs 9.35 lb (4.25 kg)

Trimble Zephyr/Tornado/Tempest GNSS antenna cable (TNC to SMB - 5.0m).

Specifically made for the TDC600, the Trimble TDC600 Screen Protectors will keep your touchscreen well-protected. This item is provided as a replacement or spare part for the TDC600. Two screen protectors ship standard with every new TDC600.

12V Vehicle Adapter for Dual Slot Battery Charger

Used with the TruPulse® Yoke (L Bracket) to mount the TruPulse® 200L to a tripod or staff. Provides central pivot point when used with part number 7024746 (“L” bracket) and mounted to a monopod or tripod.

TruPulse Foliage Filter is used to measure through foliage and detect pulses returned from a reflective target. Place over bottom (receive) lens of laser to filter out foliage or obstructions and only acquire a reflective target. Fits all TruPulse series products including the TruPulse 360R.

TD 24 Leveling Telescopic Rod Case / Bag. Orange.

TDC600 Range pole adapter / bracket. Range pole bracket provides the ability for users to operate in landscape or portrait modes to improve workflows that require forms/data to be entered. Ideal when using the TDC600 with an external receiver like the Catalyst DA1 or R2 receiver for a convenient all-on-the-pole solution.

Rain cover for the Trimble S-Series robots.

Crain USL/SVR 13' Carrying Case. Made from the highest quality 1000-denier nylon and is water resistant. For 13', 16', 20' and 25' CR Series Measuring Rod. Measures 4.25 x 65.5 in (10.8 x 166.4 cm).

The Trimble TSC7 Controller Hard Case contains spaces for: TSC7 controller, pole bracket, power cable, dual slot battery charger and 2 spare batteries. 2 x Dual slot chargers + power cables Trimble 360 Prism (MT1000, AT360, R10 360 or VX&SSeries360) 1 x MT1000/R-Series Receiver battery 2 x Total station batteries 2 x Spare antenna slots Outer Case Dimensions: 466mm x 351mm x 286mm (18.36” x 13.82” x 11.26”)

Maintain target lock with confidence using Trimble Active Tracking technology and selecting from 8 different channels. Target has 360 foil and a single ring of LED's for Active Tracking. Target height - Trimble Standard - 135mm. Prism Constant: +22mm.

360 Prism includes a height adapter to Trimble Standard target height (135mm). The 360 prism is designed for Integrated Surveying withTrimble GNSS receivers. Compatible with all S Series, SX10, and SX12 instruments. Prism Constant: +2mm (0.002m). 1 Inch.

Traverse prism with sighting target and AR coating. Target height - Trimble Standard - 135mm. Prism Constant: -35mm