Building Construction - Accessories

The Carbon Fiber pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections  1.25 inch (32 mm) outside diameter 25 cm in length Weighs 0.35 lb (0.16 kg)

Simplify the charging process by charging up to four batteries with our multi bay charger. This charger will work for your Trimble rover batteries or active prism (MT1000) batteries

Trimble 2.5m Telescopic Range Pole with markings read to the top of the pole. Carbon fiber and aluminium telescopic range pole - 2.5 meter.

Set of external power supply and charger for TDL450H radio modem. Charger TDL 450H Field Battery/Charger Kit 35,000 mAh capacity at 12 V. Cable with SAE connector. The kit includes a charger. Trimble 74450-14 lead-acid battery for powering radios.

Trimble GEO 7X AC Power Supply With International Plug Adapters. Also can use this Power Supply to recharge your GeoExplorer 6000 series handheld battery pack. The kit contains plug adapters for the U.K., Europe, Australasia and the United States. Also used for Juno.

The Mini Bipod utilizes the same design concepts as the popular 5217-04 bipod, just shorter 1-to-1.25 inch (25.4-to-31.8 mm) diameter poles attach easily through the open clamp 1.5 inch (3.81 cm) outside diameter poles can be loaded through the top Collapses to 25 inches (63.5 cm) and extends to 35 inches (88.9 cm) Flo Yellow Weighs 3.50 lb (1.60 kg)

The padded hand strap for the TSC5, TSC7 or T7 can sit on either side of the controller depending on personal preference. The hand strap rings can be used to attach the shoulder sling.

Designed to provide the extra stability required when working indoors on concrete and other hard surfaces Made of heavy-duty aluminum and measures 35 x 35 x 35 inches Collapses for compact storage The rubber O-ring fits over the foot of the tripod for extra stability Weighs 3 lb (1.36 kg) Works with any style of tripod; tripod pictured is for illustration only

This system tilts and slides up and down pin poles Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder Site cones double as locks The prism has a 40-minute adjustable vial The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads A system bag is also included Weighs 1.40 lb (0.63 kg)

The Trimble Traverse Kit contains case, traverse prism, prism base with level and tribrach with no optical plummet. The prism base with level has a lever arm with bottom of notch measurement that enables accurate height measurements and removes the need to remeasure when pairing with an S Series instrument.

Mounting Bracket for TruPulse 360R and 200X

Magnet has a 3.5 inch diameters. Features a 5/8 x 11 tip. Weighs 1.17 lb (0.53 kg).

Trimble Cover for Panel Holder - S Series Total Station Accessory.

Designed so the GPS surveyor has all the features needed in a single rod, they’re ideal for kinematic surveys Zero height (0 H.T.) Carbon fiber makes these rods 30% lighter The included pin can lock the length of the rod at 1.8 m, 2 m, 2.2 m TLV™ locks with 40-minute vials are standard Metric Graduations (cm) Length 4.48 ft – 8.14 ft (1.4 m – 2.5 m) Weighs 2.27 lb (1.03 kg)

The Trimble Battery Slot Inserts/Converters allow you to use the Trimble dual slot and 5 slot battery chargers to charge your R10/R12/R12i batteries. Trimble Geospatial Accessory (Qty of 2 inserts).

The main compartment of this bag is constructed of tough Rhinotek material and designed to hold 24inch stakes or rebar.

The rotating friction-top adapter allows the prism to be pointed after installation in the tribrach. Fits all tribrachs.

This tool checks and adjusts optical plummet tribrachs & tribrach bubbles. The adjuster is constructed of precision-machined anodized aluminum with a 2-minute bubble.