Forensics - Accessories

The Satellite Stick™ XL is composed of six carbon fiber sections connected by an elastic shock cord Each section measures 25 mm (1 in) diameter Sections screw together with 303 stainless steel fittings to make a rigid pole Collapses to the compact length of 37.5 cm (1.23 ft) Includes a 40-minute adjustable bubble, an elastic strap, a replaceable point, and a carrying bag Use adapter (#D11145) to increase the diameter of the pole to 1.25 inches to accommodate Claw™ series data collector pole clamps (sold separately) Weighs 2.75 lb (1.25 kg)

Whip Antenna for Trimble with Frequency range: High frequency 406-430MHz for trimble GPS Base station receiver.

Here’s a versatile prism system in a small package The assembly features a 25 mm copper-coated prism, for fog prevention, a tilting holder, with friction axis, zero or -30 mm offset Powder painted Fluorescent Orange with Fluorescent Yellow targets Includes a 40-min adjustable circular center-mounted vial Assembly can mounted on a Prism pole or tribrach at three heights: 70 mm, 100 mm, 115 mm, or can be hand-held using the plumb bob bracket or with S-hook for quick attachment to plumb bob Also included a point for stake-out work, and a system bag with belt loop Weighs 0.34 lb (0.15 kg)

Soft carry pouch for Geo 7X/6000 handhelds.

Range pole bracket for Geo 7 series handhelds, with quick-release tilt and tilt-adjustment mechanism This accessory can be used with the following products: Trimble Geo 7 series handhelds Trimble GeoExplorer 6000 series handhelds

This bipod features a special head that will hold a rectangular rod The head will fit rods with widths between 1.57 and 2.56 inches Flo Orange Weighs 4.00 lb (1.82 kg)

This adapter has male 5/8 x 11 threads to Quick-Release Weighs 0.08 lb (0.04 kg)

Carries up to 50 lath Measures 33 inches (84 cm) long Features two handle straps Orange Weighs 1.46 lb (0.66 kg)

This Stabilizer helps prevent tripod legs from slipping when used on hard, slick surfaces. Lightweight and portable Collapses to  26 3/8″ (67cm) Opens to a three point star with 26 1/2″ (67cm) legs Two 0.315″ (8mm) hole in each leg, one at 35CM from center and one at 65cm. Anodized aluminum legs O-rings to hold tripod foot in place Center opening  1 7/8″ (45mm) Weight  1.05 lbs (0.48kg)

3.37 inch (85.6 mm) aluminum body Removable point Weighs 0.10 lb (0.05 kg)

Features 5/8-11 Female to 1/4-20 Female Weighs 0.20 lb (0.09 kg)

This -30 mm offset prism holder is constructed from durable aluminum and sealed with a rugged corrosion-proof electrostatic powder paint coating Includes copper-coated (#6411-02-BLK) prism Flo Orange Weighs 1.50 lb (0.68 kg)

Features ‘site cones’ that improve vertical angle pointing — the site cones double as tilting-axis lock knobs The adjustable 40-min vial is mounted on the front side and is easy to see and simple to adjust This mini-prism is a zero-offset if you reverse the prism. Includes carrying case Flo Orange Weighs 0.30 lb (0.14 kg)

Aluminum pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections 2 ft (61 cm) in Length 1.25 in (32 mm) Outside Diameter Standard Yellow Weighs 1.10 lb (0.50 kg)

These are designed so the GPS surveyor has all the features needed in a single rod, they’re ideal for kinematic surveys Zero height (0 H.T.) Carbon fiber makes these rods 30% lighter Included pin that locks the length of the rod at set points Locking Length 1.8 m, 2 m, 2.2 m TLV™ locking mechanism includes a 40-minute vial built in Dual graduation (10ths/cm) inner pole Length 4.48 ft – 8.14 ft (1.4 m – 2.5 m) Weighs 2.27 lb (1.03 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs The telescopic Aluminum (Round) legs allow for setup Extends to 65 in (1.65 m) Features a Quick Clamp lock type with a Triangle/Flat head Tripod Hardware comes in Orange Weighs 9.35 lb (4.25 kg)

Trimble Zephyr/Tornado/Tempest GNSS antenna cable (TNC to SMB - 5.0m).

Specifically made for the TDC600, the Trimble TDC600 Screen Protectors will keep your touchscreen well-protected. This item is provided as a replacement or spare part for the TDC600. Two screen protectors ship standard with every new TDC600.

12V Vehicle Adapter for Dual Slot Battery Charger

Used with the TruPulse® Yoke (L Bracket) to mount the TruPulse® 200L to a tripod or staff. Provides central pivot point when used with part number 7024746 (“L” bracket) and mounted to a monopod or tripod.