Accessories

Trimble R10, R12 and R12i Rechargeable Battery (7.4V, 3700 mAHr, 27.3 Wh). A smart lithium-ion battery inside the Trimble R10/R12/R12i system delivers extended battery life and more reliable power. A built-in LED battery status indicator allows you to quickly check the remaining battery life.

TSC7 pole bracket assembly. Replacement TSC7 bracket only.

The Trimble 2.4 GHz TNC/R radio antenna has a NEW smaller size, just 4 1/2 inches and is compatible with: These Robotic Total Stations:Trimble S-Series, Trimble 5600 series, , Trimble RTS-Series, Trimble SPS-Series, and Trimble VX. These Data Collectors:Trimble TSC2, TSC3, Trimble SPS series and EM120 Radio Module mounted to TSC5 or TSC7 Data Collectors and T100 Tablets and Trimble georadios.   Not Compatible with:Trimble T10 or Yuma 2 Tablet (requires Antenna SKU 91486-00)

2 pack of TSC7 rechargeable batteries with LED charge indicator.

With the TSC7 Pole Mount/Bracket your TSC7 controller simply snaps into the lock. To remove, just pull the lever. The device mount detaches from the pole claw. The pole part remaining on the pole fits inside a 10cm (4”) tube.

Li-Ion Rechargeable Battery 7.2V, 2200 mAHr battery for use with the Trimble R2 / R8 / R8s / R780 GNSS receivers and the MT1000.

Converts a TNC connector to an antenna mount for your Trimble TM3/HPB450 Radio whip antenna.

Trimble TSC5 Data Collector Bracket.

TSC5/TSC7 Passive Metal Stylus with tether, screwdriver and 2 extra tips.

This part is compatible with both the TSC5 pole mount bracket and TSC7 pole mount bracket. The attachable arm includes 3 options for attaching to the pole mount bracket. The pole clamp part (with the bracket/arm and TSC5 detached) remains on the pole fits inside a 10 cm (4") tube.

This rod features a new one-piece design. Its faster to set up and more user-friendly compared to traditional two-piece, screw-together rods. Its an ideal rod for all GPS RTK surveys. Perfect for use with the any Trimble Receiver, Juniper Geode or any handheld device with an external antenna.

Trimble radio antenna - 0db - 5db Whip, 450-470MHz.

The TSC7 external Battery Charger with international power cord and two batteries.The charger recharges one set of 2 batteries for the TSC7 controller.

Open Clamp Bipod allows a surveyor to set up a freestanding GPS antenna pole or prism pole 1-to-1.25 inch (25.4-to-31.8 mm) outside diameter. Legs extend to 6 feet (1.8 m) for use in uneven terrain.

Trimble R10/R12/R12i UHF Radio Antenna with SMA Connector (410-470 MHz, 0 dB) The GNSS antenna and its cabling should be installed in accordance with all national and local electrical codes, regulations, and practices.

Hardened steel replacement point for most SECO tripods and prism pole points Weighs 0.06 lb (0.03 kg)

This point features an anodized aluminum body and an easy-to-replace steel point.

This cable provides power and data between your Trimble TDL 450 & Pacific Crest TDL 450, ADL 450, HPB, PDL, XDL, RFM-96, high power base radio and your R10, R8S, R8 series, R7, 5700, 5800, 4800, 4700 and Epoch 35 & 50 receivers. 7 pin #0 Lemo to 5 pin #1 Lemo - SAE Power connector on 5 pin #1 Lemo end. This cable is 12 ft. Long. Part Number 66656-10 cable is NOT compatible with the TDL450B radio and can damage the TDL450B unit!

Trimble T100 replacement universal mounting adapter/plate.