This 12' twist lock prism pole features the TLV™ locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual graduations on the inner pole.

SECO Pole Clamp locks securely to the pole, no slipping! Tilting Feature with three positions, +10, +30 or +50 degrees. Quick Release from Pole Clamp for taking photos, etc. and also allows landscape or portait orientation of the display.

The 62 mm silver-coated prism is encased in a heavy-duty canister with M20 threads Features a prism accuracy of <5 seconds and a -35 mm offset The mounting base features standard female 5/8 x 11 threads Tilting holder is constructed of anodized aluminum The height of prism in the holder is 135mm Target size is 6 x 9 inches (15.2 x 22.8 cm) Target Colors are Yellow with Black Weighs 1.75 lb (0.80 kg)

The -30/0 mm offsets enable the Premier Prism Assembly to be used with Nikon, Topcon, Sokkia and other total stations The 62 mm copper-coated prism is encased in a heavy-duty canister with M20 threads Features a prism accuracy of <5 seconds Tilting holder is constructed of anodized aluminum Height of the prism in the holder is 100 mm and -30/0 mm offsets The mounting base features standard female 5/8 x 11 threads Target size 6 x 9 inches (15.2 x 22.8 cm) Target Colors are Flo Orange with Black Weighs 1.75 lb (0.80 kg)

This heavy duty tripod accommodates 5/8" x 11" instruments and is ideal for mounting lasers, total stations and auto levels.The telescopic legs allow for setup at various heights. The tripod extends 72" and features a flat head. Lock type: Quick Clamp.

Connects your Trimble TDL450 / HPB450 / PacCrest PDLradio to a 12V car battery. SAE to alligator clips. Cable is 6ft in length.

ROBOTIC POWER KIT includes hard carry case, three S-series batteries & one triple battery holder. Use it to store your 2 Dual Battery Charger with power supplies & power cords.

These carbon fiber telescoping poles are graduated to read direct for a 135 mm prism height Adapters will achieve other prism heights Features include a stainless steel pin which locks the inner pole Holes are spaced every 0.5 ft Poles include the popular TLV™ lock which has a 40-minute vial built-in Inner poles have dual graduations: centimeters and 0.01 ft This pole telescopes to 8.53 ft (2.60 m) and collapses to 4.97 ft (1.52 m). Weighs 2.30 lb (1.04 kg)

Rechargable Battery 8000 mAh for MM60/TDC650/TDC600.

The RAM-B-202AU, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a 2.5" diameter round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.

Rain cover for the Trimble S-Series robots.

Trimble Cordura Pouch can hold a 6ft antenna mounting pole, whip antenna and a mounting washer.

Radio Antenna Mast Assembly for Tripod Fits most heavy-duty-type tripods (like the 5203-10) after the bolt assembly has been removed The mast telescopes to 7.5 ft (2.3 m) – plus your tripod height for maximum height Easy to install and a hex tool is included Convert your extra tripod to a radio base set-up

The Trimble 2.4 GHz TNC/R radio antenna has a NEW smaller size, just 4 1/2 inches and is compatible with: These Robotic Total Stations:Trimble S-Series, Trimble 5600 series, , Trimble RTS-Series, Trimble SPS-Series, and Trimble VX. These Data Collectors:Trimble TSC2, TSC3, Trimble SPS series and EM120 Radio Module mounted to TSC5 or TSC7 Data Collectors and T100 Tablets and Trimble georadios.   Not Compatible with:Trimble T10 or Yuma 2 Tablet (requires Antenna SKU 91486-00)

Connects your R6 / R8 / R10 / R12 / R12i GPS receiver to a 12V car battery. 7pin lemo to alligator clips. 10 feet long.

R10/R12/R12i Serial Office Data and Power Y-Cable. 7P Lemo to DB9 and Power.

360 Prism includes a height adapter to Trimble Standard target height (135mm). The 360 prism is designed for Integrated Surveying withTrimble GNSS receivers. Compatible with all S Series, SX10, and SX12 instruments. Prism Constant: +2mm (0.002m). 1 Inch.

Quick Release Tip, 1/4 X 20 X 3/8M, used to mount a TruPulse to a pole.

This part is compatible with both the TSC5 pole mount bracket and TSC7 pole mount bracket. The attachable arm includes 3 options for attaching to the pole mount bracket. The pole clamp part (with the bracket/arm and TSC5 detached) remains on the pole fits inside a 10 cm (4") tube.