866.565.4936
Speak to Sales
866.565.4936
Speak to Sales-
Laser Tech's TruPulse 360R & 200X Mounting Bracket for TruAngle.
-
Regular price $265.00Regular priceUnit price per
Quick Release Pole Mount for TSC5/TSC7
This part is compatible with both the TSC5 pole mount bracket and TSC7 pole mount bracket. The attachable arm includes 3 options for attaching to the pole mount bracket. The pole clamp part (with the bracket/arm and TSC5 detached) remains on the pole fits inside a 10 cm (4") tube.
-
An alternative boot with 2 USB ports.
-
The standard boot for the TSC7 controller. It is available as a user-replacement accessory in case of damage.
-
Regular price $312.70Regular priceUnit price per
Trimble Desktop Hub for TSC5/TSC7/T7
The desktop hub includes a USB cable and power supply.
It provides:
1 Display Port, which supports a single 2K monitor (up to 2560 x 1600 x 30 fps)
1 DVI-I and 1 HDML port, which support dual monitors (up to 2048 x 1152 x 60 fps)
1 Gigabit Ethernet port for wired access at ultra-fast speeds
3 USB 3.0 SuperSpeed ports for the latest peripherals
1 USB 3.0 powered port for fast device charging
1 Audio In/Out port for mics, speakers, and earphones
An Integrated Lock Slot which accommodates security locks to safeguard equipment
-
The padded hand strap for the TSC5, TSC7 or T7 can sit on either side of the controller depending on personal preference. The hand strap rings can be used to attach the shoulder sling.
-
Holds the TSC7 / Ranger 7 handheld computer on an instrument tripod.
Features:
- Easy installation and removal
- Adjust location on tripod leg for your convenience
- Powder painted aluminum
- Weighs only 0.4 lbs.
-
Regular price $458.99Regular priceUnit price per
SECO Adjustable Tilt Monument Mount
- For 2-inch pipe with MPT 2 x 11-1/2 TPI
- The adapter has 3.20-inch (8.19 cm) diameters and overall heights of 3.036 inches (7.71 cm)
- Includes a removable brass 5/8 x 11 male stud that is adjustable in azimuth and held in location by two set screws
- The adapters are leveled by three screws with a tilt range +/- 7°
- The height above the pivot point to the stud shoulder is 1.37 inches (3.50 cm)
- The height below the brass 5/8 stud to the shoulder is 0.463 inches (1.18 cm)
- The axis height is engraved on the outside of the monuments
- Weighs 6.80 lb (3.08 kg)
-
- Anodized aluminum plate
- The three bottom anchor bolts are embedded in concrete during installation
- With 5/8 x 11 threaded stud for Tribrach adapter centered on the plate
- Weighs 2.29 lb (1.04 kg)
-
Regular price $281.09Regular priceUnit price per
SECO Optical Plummet Twist Focus Tribrach – Yellow
- The Optical Plummet Twist Focus Tribrach features twist focus (2.5X mag) and leveling screws with center line
- Features an 8-min vial, three-prong forced centering and a 5/8 x 11 base
- This tribrach has a focusing range of 1.5 to 50 feet (0.5 to 15 m)
- Yellow
- Weighs 1.85 lb (0.84 kg)
-
Sold outRegular price $91.46Regular priceUnit price per
SECO 40 Min Vial Assembly - for 1.50-inch OD Pole
- This assembly is for 1.50-inch diameter poles
- Features the 40-minute vial (#D11232)
- Includes screws
- Weighs 0.19 lb (0.09 kg)
Sold out -
Regular price $54.03Regular priceUnit price per
SECO Anti-Rotation Quick Release 60 mm - Tip only
- Anti-rotation quick-release - Tip (for Base part #5111-04-050)
- Converts any GNSS receiver or prism with 5/8 x 11 threads to a quick release
- Heavy-duty construction, will hold up to 20 lb (9.00 kg)
- Short height, only 60 mm
- Constructed of quality stainless steel and aluminum
- Easy to operate, push button release
- TIP ONLY
- Weighs 0.35 lb (0.16 kg)
-
Regular price $42.06Regular priceUnit price per
SECO GPS Quick-Release Tip Adapter
- This adapter has male 5/8 x 11 threads to Quick-Release
- Weighs 0.08 lb (0.04 kg)
-
Regular price $290.29Regular priceUnit price per
SECO Triple Mag Mount with 5/8 x 11 Tip
- This lightweight magnetic mount system adapts easier to curved surfaces
- Features a 5/8 x 11 adapter allows for quick setups
- Weighs 4.15 lb (1.88 kg)
-
Sold outRegular price $89.57Regular priceUnit price per
SECO Single Mag Mount with Quick-Release Tip
- Magnet has a 3.5-inch diameter
- Features a quick-release tip
- Weighs 1.16 lb (0.53 kg)
Sold out -
- SECO’s 5114-10 is an extra-tall magnet mount for use when attaching GNSS receivers with downward antennas (like the Trimble R10) to vehicles or other metal surfaces
- An innovative spring design allows for greater flex to the magnets for use on curved surfaces
- The 5114-10 is lightweight due to its stainless-steel construction
- Measures 6.375 inches (162 mm) in height
- Weighs 3.75 lb (1.70 kg)
-
Regular price $28.39Regular priceUnit price per
SECO 21 mm Male and Female 5/8 x 11 Adapter
- Anodized aluminum body
- Male and female 5/8 x 11 threads
- Height is 21 mm
- Center height is 135 mm with 230 mm Sphere (6704-001)
- Weighs 0.05 lb (0.02 kg)
-
Regular price $419.82Regular priceUnit price per
SECO Claw Cradle Assembly for TSC5
The Claw™ is an improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
- New Claw design for the TSC5 Controller
- Made of durable machine-anodized aluminum and stainless steel construction for years of trouble-free use in the field
- Includes replaceable silicone pads that hold the controller securely
- This new design utilizes SECO’s stronger quick release that we use on heavy tablet pole brackets
- Pole Clamp fits all standard 1.25 inch diameter poles
- Pole Clamp has six tilt positions from vertical to horizontal of the display
- Assembly weighs only 0.95 lb (0.43 kg)
- Component 5200-080 (Claw Cradle) weighs 0.04 lb (0.18 kg)
- Component 5200-167 (Pole Clamp) weighs 0.55 lb (0.25 kg)
-
- Includes a cam-lock antenna pole, adjustable straps, several interior pockets, belt loop straps, and rain flap
- Interior dimensions: 15 x 9 x 4 inches (38.1 x 22.86 x 10.16 cm)*
- The pole extends from 15 7/8 to 32 inches (40.3 to 81.3 cm)
- Has 5/8 x 11 tip on antenna pole
- Orange
- Weighs 2.00 lb (0.91 kg)
-
Adjustable 6 inch (152 cm) Black and White tilting target, for affixing to pole top and used in multiple survey jobs.
- Contrasting 6″ (152mm) Black and White pattern
- Matte non-glare target material
- Adjustable tilting axis
- Anodized aluminum yoke and target plate
- Axis height 135mm
- 5/8-11 threaded base
- Weight 0.90 lbs, 0.41kg
