This 5-section aluminum leveling rod are made of a light and durable alloy The telescopic sections are anodized and silk-screened with moisture-resistant ink Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side The rod is 16.4 ft length and uses 10ths graduations Each rod includes a special level and protective bag Weighs 3.50 lb (1.60 kg)

Radians SV55 Type R Class 2 Heavy Duty Two Tone Engineer Safety Vest is intended for professional field engineers and construction superintendents. Rugged Oxford material in front provides resistance to tough working conditions while supporting extra weight in cargo pockets.  Reflective material is utilized for reinforcement edge binding further enhancing nighttime visibility.  Includes numerous multi-function pockets, configured specifically for upside down paint, water bottles and tablets

Schonstedt’s underground magnetic locators have been setting the standards for reliability and dependability for over 50 years. They are designed to withstand the rigors of daily on-site usage and a wide range of environmental conditions. The GA-52Cx Locator detects the magnetic field of iron and steel objects and energized power lines. Both provide audio detection signals that peak in frequency when the locator's tip is held directly over the target. High levels of sensitivity allow you to find what you’re looking for quickly, without the risk of passing over your target. 85% of the Surveyor market can’t be wrong. So rugged and dependable it's backed by a 7-year warranty

Trimble Tribrach with optical plummet for prisms, targets or GNSS setups. Tribrach 3 Pin type (GDM/GTR/ATS).

Transport case for Trimble SX instruments. Contains backpack straps for extra transportation versatility.

The Trimble TSC7 Controller Hard Case contains spaces for: TSC7 controller, pole bracket, power cable, dual slot battery charger and 2 spare batteries. 2 x Dual slot chargers + power cables Trimble 360 Prism (MT1000, AT360, R10 360 or VX&SSeries360) 1 x MT1000/R-Series Receiver battery 2 x Total station batteries 2 x Spare antenna slots Outer Case Dimensions: 466mm x 351mm x 286mm (18.36” x 13.82” x 11.26”)

360 Prism includes a height adapter to Trimble Standard target height (135mm). The 360 prism is designed for Integrated Surveying withTrimble GNSS receivers. Compatible with all S Series, SX10, and SX12 instruments. Prism Constant: +2mm (0.002m). 1 Inch.

Traverse prism with sighting target and AR coating. Target height - Trimble Standard - 135mm. Prism Constant: -35mm

This stylish bag fits a TSC7. The bag is made out of Cordura 1000 Denier with padding. It has 2 internal bags for spare batteries, a business card holder, pencil holders. The shoulder sling can be mounted right or left at the bottom of the bag.

Trimble Base Station Extension (0.15 m) with Height Measurement Lever. Compatible with: R12i, R12, R10, R9s, R8s, R2.

The ML-3 is a much-anticipated and welcome addition to the ML family of magnetic locators from SSI. ML-3 magnetic locators represent the best in innovation at work for the water/sewer industry, surveying industry and military. That's because the ML-3 reflects many of the items on our customers' technological wish lists. The ML-3 short is 40" to meet surveyors' personal preference, providing an ergonomic, lightweight, rugged, one-handed operation option to traditional magnetic locators. The ML-3 offers unparalleled durability, as all components are housed inside the aircraft-grade aluminum monotube units. Photo of ML-3S - 100% waterproof.

Pack of 10 Trimble adhesive black & white checker targets. Only suitable for manual aiming.

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs. The telescopic Aluminum (Round) legs allow for setup to extend to 65 in (1.60 m). Features a quick clamp and a triangle/flat head tripod. Weighs 7.45 lb (3.38 kg).

Crain Tri-Max Complete Retainer Bell and Assembly Replacement. Includes Loctite 242 threadlocker and complete assembly instructions.Replaces P/N 91750 and 91751.

Designed so the GPS surveyor has all the features needed in a single rod, they’re ideal for kinematic surveys Zero height (0 H.T.) Carbon fiber makes these rods 30% lighter The included pin can lock the length of the rod at 1.8 m, 2 m, 2.2 m TLV™ locks with 40-minute vials are standard Metric Graduations (cm) Length 4.48 ft – 8.14 ft (1.4 m – 2.5 m) Weighs 2.27 lb (1.03 kg)

This 12' twist lock prism pole features the TLV™ locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual graduations on the inner pole.

This SECO 32 oz (907 g) plumb bob is precision-machined from solid brass. It includes a hardened steel point. Each bob contains storage area for a spare point. Weighs 32 oz (907 g).

This SECO 24 oz (680 g) plumb bob is precision-machined from solid brass. It includes a hardened steel point. Each bob contains storage area for a spare point. Weighs 24 oz (680 g).

The 33' heavy-duty power tape features a rubberized black and high visibility yellow case with a positive thumb lock and release action. Graduations in 10ths/metric. Length: 33 ft.

The heavy-duty power tape features a rubberized black and high visibility yellow case with a positive thumb lock and release action. Graduations in 10ths/inches. Length: 33 ft