The Mini Bipod utilizes the same design concepts as the popular 5217-04 bipod, just shorter 1-to-1.25 inch (25.4-to-31.8 mm) diameter poles attach easily through the open clamp 1.5 inch (3.81 cm) outside diameter poles can be loaded through the top Collapses to 25 inches (63.5 cm) and extends to 35 inches (88.9 cm) Standard Yellow Weighs 3.50 lb (1.60 kg)

This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target (-30 mm offset) Two on-board 130-minute vials — top and bottom Includes replaceable plumb bob point Flo Orange Weighs 0.62 lb (0.28 kg)

Tape made from epoxy paint coated steel Features a rubberized black and high visibility yellow case with a positive thumb lock and release action Graduations in 10ths/metric or 10ths/in Length: 25 ft.

The SITEGEAR 11220 leather hammer holder is made with heavy duty top grain leather for durability and maximum life. The steel hammer ring is wedged between two layers of premium leather and stitched with heavy duty nylon thread. Note: Hammer not included. Made of heavy duty custom-tanned top grain leather Edge stitching in contrasting heavy duty nylon thread for durability and maximum life Rivets are placed to secure holder Steel hammer ring wedged between two layers of premium leather Slits to fit up to 3” (76mm) belt

Protects your TSC5 screen - this case is made from a special blend of polyurethane specifically designed to absorb impacts and to better protect your investment.  Does not interfere with use of TSC5 radio module or features.

Designed to hold 24 inch (61 cm) stakes or rebar with a center partition Main compartment of this bag is constructed of tough Rhinotek™ material Features include hammer loop, adjustable strap and brass grommet drain holes Orange Weighs 1.70 lb (0.77 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Quick-Release cradles plug directly into Quick-Release Pole Clamps Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute vial built on to the clamp The Delrin Adapter can be purchased seperately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.38 lb (0.17 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard 1.25 inch OD rods and poles Includes Quick Release and Battery Slot Weighs 0.46 lb (0.21 kg)

Features include an outside pocket with a Velcro closure and 2 inch straps made with heavy-duty webbing Also features a Rhinotek and leather reinforced bottom Measures 10.25 x 15 inches (26 x 38 cm) Orange Weighs 1.30 lb (0.59 kg)  

The Keson NR Series Nylon-Reinforced Steel Blade with Standard Rewind is a Keson best seller! Since 1968 this style of Keson steel tape has been providing customers with accurate measurements. They are used in the harshest conditions in which people measure, and they stand to the only test that matters: field performance. We have made modifications to the housing over the years: Better plastic and molding shapes for increased durability. Double screws to hold the housing together in the event of a drop. Better blade axle to reduce breakage due to the weight of the tape if dropped. For years we’ve been honoring warranty dates long past a single year, so we are now proud to offer a limited lifetime warranty on these products. FEATURES Tough, double nylon-coated steel blades. Break-resistant under severe use in the field. 3/8-inch wide blade reduces wind drift and tape weight. Metal-reinforce crank handle for durability.

Braided mason twine doesn’t come apart even when reused. It is perfect for large jobs and everyday use. You can also nick it with a trowel and it won’t unwind. Another benefit is that braided mason line does not spin as much as a twisted line, bringing plumb bobs to rest sooner. FEATURES 18-gauge line with an approximate tensile strength of 155 pounds. 1000 feet = 1 pound.

Stainless steel housing, nylon-reinforced steel blade. The world’s best steel long tape in a housing that’s built to last. Features the strongest housing (stainless steel) on the market. Tough, double nylon-coated steel blade assures long life under field abuse. Rubbergrip shovel handle for comfortable, rapid reeling. Metal crank handle for durability. Housing is reinforced with rivets for superior strength.  

Laserline Mfg. Inc. is the world's largest manufacturer of direct reading (Lenker style) grade rods, which feature a movable tape face allowing you to set the actual benchmark elevation, or any elevation, above or below the bench into the rod. Laserline detector brackets attach to the special rail slide on laser grade rods. Made of rugged, lightweight extruded aluminum with a black anodized finish. 

Laserline Replacement Tape - 10 foot - 10ths/100ths for Laserline 10' Direct Reading Rods. Heavy-duty matte textured face makes tape easy to read in bright sunlight and protects numbers from wear and fading with heavy-duty brass tape lock grommets are oversized, minimize tape tearing Measurement: 10ths/100ths

Laserline Carrying / Storage Bag features sturdy black cordova nylon with strap, velcro flap and pocket for bracket and detector. 15-foot (5-meter).

For aerial mapping and surveying jobs, Presco Aerial Paneling can be easily placed along a predetermined perimeter of an area to be photographed. These reusable, 4 Mil PVC panels save time and labor costs in your aerial project. Material: PVCGauge: 4 MilAerial Paneling: 12" X 300'Size: 1 rollMaterial/Ink Color: White/Black

Carrying case for Radio Antenna Tripod Case comes included when it is purchased with Radio Antenna Tripod (#5300-11 and 5300-12) Outside Dimensions: 8 inches x 54 inches (20.32 cm x 1.4 m) Orange

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute Vial and Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.43 lb (0.19 kg)

Two vibrant color options ANSI/ISEA 107 Class 2 compliant Solid polyester material 2" wide retroreflective tape Right-side mic tab Large adjustable backpack pocket Multiple exterior and interior pockets

The Seco 8068 series class 2 lightweight safety vest is great for daytime and low-light use for workers who need an intermediate level of visibility. Made of 100% polyester for softness, comfort, superior strength and abrasion resistance Fluorescent orange vest has yellow reflective tape Fluorescent yellow vest has orange reflective tape Snap front closure Exterior mic clip Multiple outside pockets for cell phone, flagging tape, radio, pencils, maps, etc., plus inside pockets and an oversized adjustable back compartment ANSI rating: Class 2 Weighs 1.67 lb (0.76 kg) Size: Large Color: Fluorescent Orange