Special Order

Claw mounting base with arm for TruPulse (LTI) products.

Trimble 360 Degree Mini Prism. 0.5'' (12.7mm) for RMT 606 / 604. Prism constant: +2mm

Crain USL/SVR 13' Carrying Case. Made from the highest quality 1000-denier nylon and is water resistant. For 13', 16', 20' and 25' CR Series Measuring Rod. Measures 4.25 x 65.5 in (10.8 x 166.4 cm).

Tape made from epoxy paint coated steel Features a rubberized black and high visibility yellow case with a positive thumb lock and release action Graduations in 10ths/metric or 10ths/in Length: 25 ft.

The 33' heavy-duty power tape features a rubberized black and high visibility yellow case with a positive thumb lock and release action. Graduations in 10ths/metric. Length: 33 ft.

Pole clamp for TruPulse products. Holds quick release and mounting bracket.

Trimble 4m metal telescoping rod with bar-code graduation on front surface. Extendable in steps, 4 sections and a circular bubble. Weight 1.8 kg

Crain Tri-Max Bell Screw Replacement.

Traverse prism with sighting target and AR coating. Target height - Trimble Standard - 135mm. Prism Constant: -35mm

Features a new shorter collapsed length 58.5 inches and a lighter weight Constructed of strong, rigid fiberglass with reinforcing ribs for added stability Waterproof and nonconductive The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant Tight locking mechanism features round buttons that resist jamming from sand and dirt Features a 1/4 x 20 female adapter in top section Graduations 8ths Includes carrying case (#91411) Length 25 ft Weighs 6.00 lb (2.72 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping Scale width graduated to fill the entire face of the rod, Measuring scale on the back side that allows for overall height readings Special molded stand-off ribs protect the scales from wear Made with strong fiberglass, which is waterproof and corrosion-resistant CR Rod series is non-conductive Perfect for laser detector mounting with no special brackets required Two section rod Collapsed length is 52 inches (1.32 m) Graduations in inches Length 8 ft Weighs 3.00 lb (1.36 kg)

Set of external power supply and charger for TDL450H radio modem. Charger TDL 450H Field Battery/Charger Kit 35,000 mAh capacity at 12 V. Cable with SAE connector. The kit includes a charger. Trimble 74450-14 lead-acid battery for powering radios.

Here’s a versatile prism system in a small package The assembly features a 25 mm copper-coated prism, for fog prevention, a tilting holder, with friction axis, zero or -30 mm offset Powder painted Fluorescent Orange with Fluorescent Yellow targets Includes a 40-min adjustable circular center-mounted vial Assembly can mounted on a Prism pole or tribrach at three heights: 70 mm, 100 mm, 115 mm, or can be hand-held using the plumb bob bracket or with S-hook for quick attachment to plumb bob Also included a point for stake-out work, and a system bag with belt loop Weighs 0.34 lb (0.15 kg)

Durable ANSI/ISEA compliant texturized polyester and polyester mesh Developed in conjunction with surveyors from the California DOT Features include YKK™ zippers, 4-inch (10.16 cm) wide reflective tape with 2-inch (5.08 cm) wide silver stripes made with 3M™ Scotchlite™ reflective material Padded collar is made with Outlast® Adaptive Comfort® material Multiple pockets – including two inside the vest – for cell phones, tape, radio, pencils, maps, spray cans, and more Dual mic clips

Anodized aluminum plate The three bottom anchor bolts are embedded in concrete during installation With 5/8 x 11 threaded stud for Tribrach adapter centered on the plate Weighs 2.29 lb (1.04 kg)

This 4-section aluminum leveling rod are made of a light and durable alloy The telescopic sections are anodized and silk-screened with moisture-resistant ink Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side The rod is 13.12 ft in length and uses 10ths graduations Each rod includes a special level and protective bag Weighs 3.10 lb (1.40 kg)

GA-92XTd is the most portable locator ever made, and easy to use. Extends for great accuracy; retracts for easy carrying and storage Fingertip control of volume and sensitivity Quick change battery compartment One hand operation makes finding faster, providing both audio and visual indication of ferrous objects up to 16 feet underground. With one hand, you can detect the magnetic fields of all ferromagnetic objects property markers, manholes, septic tanks, well casings, valve boxes, cast iron pipes, steel drums, unexploded ordnance up to sixteen feet below the surface.

Maintain target lock with confidence using Trimble Active Tracking technology and selecting from 8 different channels. Target has 360 foil and a single ring of LED's for Active Tracking. Target height - Trimble Standard - 135mm. Prism Constant: +22mm.

The Trimble TSC7 Controller Hard Case contains spaces for: TSC7 controller, pole bracket, power cable, dual slot battery charger and 2 spare batteries. 2 x Dual slot chargers + power cables Trimble 360 Prism (MT1000, AT360, R10 360 or VX&SSeries360) 1 x MT1000/R-Series Receiver battery 2 x Total station batteries 2 x Spare antenna slots Outer Case Dimensions: 466mm x 351mm x 286mm (18.36” x 13.82” x 11.26”)

Laserline's aluminum 10 ft rod in feet/tenths/100ths, plus cut/fill scale. This is a direct reading grade rod with movable tape that collapses to six feet. Case included.