6-5/8-inch flat head with large center hole (2-5/8-inch) to facilitate an easy set-up over a point Foot is equipped with a replaceable point made of hardened steel Dual Locks (Quick Clamp and Screw Clamp) Standard 5/8 x 11 threaded brass instrument stud Yellow fiberglass legs, orange aluminum hardware Snap cap to protect tripod head Comes with shoulder strap for comfortable carrying over longer distances Made in North America under strict quality controls Extends 70.75 inches (179 cm) Collapses 43.75 inches (111 cm) Weighs 13.60 lb (6.16 kg)

Features a male 5/8 x 11 thread Aluminum body Easy-to-replace steel point Weighs 0.18 lb (0.07 kg)

Features an anodized aluminum body Easy-to-replace steel point Sharp Point Weighs 0.16 lb (0.07 kg)

This point features an anodized aluminum body and an easy-to-replace steel point.

Level Vial assembly fits most 8ft & 12ft Prism Rods Assembly is for 1.25-inch diameter poles Featuring a 40-minute vial (#D11242) Top Adjusted Vial Holder Assembly Includes screws Weighs 0.14 lb (0.06 kg)

Bright 650-nm focused laser dot Circular vial w/ 8-minute sensitivity Standard three-prong forced centering with center lines Included is a standard 3 volt CR2 lithium battery Weighs 1.65 lb (0.75 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms Converts a robotics pole to a GPS pole Weighs 0.26 lb (0.12 kg)

Mounts to structural columns for stability and support for heavy instruments SECO’s Heavy Duty Column Clamp has a solid stable design and works with all 5/8 x 11 instruments The adjustable column rotates and moves vertically to orient the instrument when needed and features 12 inches (30.48 cm) of height adjustment Centerline of the 5.8 x 11 stud to column measures 15 inches (38.1 cm) Includes 20 inch standard 3/4 inch NPT Pipe with Heavy Duty sliding clamp Constructed of structural aluminum for industrial applications and stainless steel hardware Weight is 15 lbs. 6.8kg

SECO’s Heavy-Duty Column Clamp has a solid stable design and works with all 5/8 x 11 instruments The adjustable column rotates and moves vertically to orient the instrument when needed and features 12-inches (30.48 cm) of height adjustment Includes a 2-inch (5.08 cm) by 10 ft (3.05 m) strap rated for a 2200 pound load and a heavy duty ratchet to create a strong connection to both round and square columns The centerline of the 5/8 x 11 stud to column measures 15 inches (38.1 cm) Constructed of structural aluminum for industrial applications and stainless steel hardware Weighs 13.75 lb (6.24 kg)

The Seco GPS Tripod bag features a full-length zipper and shoulder strap. Designed to carry the tripod without the point on the center pole to prevent damage to the pole.

SECO Tribrach / GPS Tripod Removable Plug Adapter - Brass Center.

The open clamp attachment allows quick and easy connection to the pole. Will connect to 19- and 32-mm diameter poles. The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar.

This adapter has male 5/8 x 11 threads to Quick-Release Weighs 0.08 lb (0.04 kg)

This 5/8 x 11 stainless steel adapter adds 23.8 mm to length of rod Weighs 0.06 lb (0.03 kg)

Female 5/8 x 11 with quick release tip. Adds 23.8 mm to length of rod.

The Eclipse™ prism assembly features a water-resistant, nitrogen charged, 62 mm prism canister and reversible target Can be set at a -40 mm, which offers optimal angle measurements, even when tilting in either the horizontal or the vertical axis A -30 mm adapter is included Height to center of glass: 0.38 ft (115 mm) Weighs 1.15 lb (0.52 kg)

SECO Double Socket Arm, 1 ", Ball + Socket. Use the Ball-and-Socket Link for your custom solution  Fits the 1-inch ram ball on cradles and clamps  Weighs 0.27 lb (0.12 kg)

This prism allows for easy determination of right angle points or perpendicular points between two targets.

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs. The telescopic Aluminum (Round) legs allow for setup to extend to 65 in (1.60 m). Features a quick clamp and a triangle/flat head tripod. Weighs 7.45 lb (3.38 kg).

Anodized aluminum plate The three bottom anchor bolts are embedded in concrete during installation With 5/8 x 11 threaded stud for Tribrach adapter centered on the plate Weighs 2.29 lb (1.04 kg)