All

The LR Series leveling rods are round and easy to handle 7.6 m in length Graduations 0.5 cm Includes carrying case (replacement can be purchased here #91402) Outside Diameter is 1-5/8 inch Weighs 5.00 lb (2.26 kg)

This one-section pole is wear-resistant. The soft rubber knob is easy to tighten or loosen, even when wearing gloves. TLV lock features a convenient 40-minute vial built into the lock.

Features 5/8-11 Female to 1/4-20 Female Weighs 0.20 lb (0.09 kg)

Features 5/8-11 Female to 1/4-20 Male Weighs 0.17 lb (0.08 kg)

This tripod features a collapsible center staff with twist locking mechanism that rotates 360; to check calibration of plumbing with a 8-minute vial, and quick release; twist locking mechanisms on the legs. It is dual graduated and adjusts to three heights: 2 m, 1.8 m, and 1.5 m.

For 2-inch pipe with MPT 2 x 11-1/2 TPI The adapter has 3.20-inch (8.19 cm) diameters and overall heights of 3.036 inches (7.71 cm) Includes a removable brass 5/8 x 11 male stud that is adjustable in azimuth and held in location by two set screws The adapters are leveled by three screws with a tilt range +/- 7° The height above the pivot point to the stud shoulder is 1.37 inches (3.50 cm) The height below the brass 5/8 stud to the shoulder is 0.463 inches (1.18 cm) The axis height is engraved on the outside of the monuments Weighs 6.80 lb (3.08 kg)

3.37 inch (85.6 mm) aluminum body Removable point Weighs 0.10 lb (0.05 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs The telescopic Aluminum (Round) legs allow for setup Extends to 65 in (1.65 m) Features a Quick Clamp lock type with a Triangle/Flat head Tripod Hardware comes in Orange Weighs 9.35 lb (4.25 kg)

Seco Bolo 13 inch Machete serves as a heavy-duty tool for clearing brush while in the field. It features a 13-inch (33.02-cm) blade with an overall length of 19 inches (48.26 cm). The sturdy wooden handle is secured by three steel pins. Includes a zippered black vinyl sheath with belt loop

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard poles or rods with a 0.75 to 1.25 inch OD Includes Compass and 40-Minute Vial Weighs 0.60 lb (0.27 kg)

This tool checks and adjusts optical plummet tribrachs & tribrach bubbles. The adjuster is constructed of precision-machined anodized aluminum with a 2-minute bubble.

These lightweight two-piece rover rods are perfect for all GPS applications. Features a male 5/8 x 11 tip and 40-minute vial. Rover rod has a fixed-height of 2 meters.

Center Punch Point fits all poles or products with male 5/8 x 11 threads. Hardened steel point will mark all metal and non-metal surfaces. Weighs 0.20 lb (0.09 kg)

Seco Claw™ Cradle is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it.

Made of durable anodized aluminum for years of trouble-free use in the field. These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller.

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute Vial and Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.43 lb (0.19 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs. The telescopic Aluminum (Round) legs allow for setup to extend to 65 in (1.60 m). Features a quick clamp and a triangle/flat head tripod. Weighs 7.45 lb (3.38 kg).

This prism allows for easy determination of right angle points or perpendicular points between two targets.

SECO Double Socket Arm, 1 ", Ball + Socket. Use the Ball-and-Socket Link for your custom solution  Fits the 1-inch ram ball on cradles and clamps  Weighs 0.27 lb (0.12 kg)