3.37 inch steel body, removable point Weighs 0.30 lb (0.14 kg)

Tilting pivot allows measurement on sloped or flat pipe surfaces Standard topo shoe length, 3.375-inch (85.7-mm), compatible with all SECO Poles 2-inch (50.8-mm) diameter chrome-plated steel housing with grade-8 ceramic magnet ring Magnet has 40 pounds of pull force on 3/8-inch (9.5-mm) clean steel plate Black anodized machined 6061 aluminum body Machined brass pole connecter with female 5/8 x 11 threads Weighs 0.55 lb (0.25 kg)

This 5/8 x 11 stainless steel adapter adds 23.8 mm to length of rod Weighs 0.06 lb (0.03 kg)

Male 5/8 X 11 to Bayonet Weighs 0.43 lb (0.19 kg)

Three screw-leveling with center line Comes without optical plummet 8-minute circular vial 5/8 x 11 base thread Black Weighs 1.66 lb (0.75 kg)

Bright 650-nm focused laser dot Circular vial w/ 8-minute sensitivity Standard three-prong forced centering with center lines Included is a standard 3 volt CR2 lithium battery Weighs 1.65 lb (0.75 kg)

Features 5/8-11 Female to 1/4-20 Female Weighs 0.20 lb (0.09 kg)

Features 5/8-11 Female to 1/4-20 Male Weighs 0.17 lb (0.08 kg)

Constructed from anodized aluminum, adapts 5/8 x 11 tripod to 3-1/2 x 8 Weighs 0.65 lb (0.30 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Adjustable 5/8 x 11 Target Height: 50 mm to 115 mm Weighs 0.29 lb (0.13 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms Converts a robotics pole to a GPS pole Weighs 0.26 lb (0.12 kg)

Use for checking and adjusting optical plummet tribrachs in the office Precision-machined, black anodized aluminum Weighs 0.70 lb (0.32 kg)

This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target Two on-board 130-minute vials — top and bottom Includes replaceable plumb bob point 0 and -30 mm Offset Flo Yellow Weighs 0.62 lb (0.28 kg)

Incorporates a simple stainless steel locking mechanism that’s easy to set while adjusting the prism and target tilt The heavy-duty 62 mm silver-coated prism is sealed in a strong canister with an ‘O’ ring to prevent water and dust from getting inside The prism can be mounted in either 0 or -30 mm offset positions Tilting axis height is 115 mm Target Size is 6 x 9 inch Target Colors are Flo Orange with Black Weighs 1.75 lb (0.79 kg)

The Standard Prism Assembly features a copper-coated, canister-type 62 mm prism, simple but proven locking and 5.5 x 7 inch target It’s waterproof, has a M20 universal mounting thread and the tilting axis height is 115 mm Prism can be mounted in either 0 or -30 mm offset positions Target Colors are Flo Orange with Black Weighs 1.35 lb (0.62 kg)

The -30/0 mm offsets enable the Premier Prism Assembly to be used with Nikon, Topcon, Sokkia and other total stations The 62 mm copper-coated prism is encased in a heavy-duty canister with M20 threads Features a prism accuracy of <5 seconds Tilting holder is constructed of anodized aluminum Height of the prism in the holder is 100 mm and -30/0 mm offsets The mounting base features standard female 5/8 x 11 threads Target size 6 x 9 inches (15.2 x 22.8 cm) Target Colors are Flo Orange with Black Weighs 1.75 lb (0.80 kg)

The 62 mm silver-coated prism is encased in a heavy-duty canister with M20 threads Features a prism accuracy of <5 seconds and a -35 mm offset The mounting base features standard female 5/8 x 11 threads Tilting holder is constructed of anodized aluminum The height of prism in the holder is 135mm Target size is 6 x 9 inches (15.2 x 22.8 cm) Target Colors are Yellow with Black Weighs 1.75 lb (0.80 kg)

The Eclipse™ prism assembly features a water-resistant, nitrogen charged, 62 mm prism canister and reversible target Can be set at a -40 mm, which offers optimal angle measurements, even when tilting in either the horizontal or the vertical axis A -30 mm adapter is included Height to center of glass: 0.38 ft (115 mm) Weighs 1.15 lb (0.52 kg)

This system tilts and slides up and down pin poles Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder Site cones double as locks The prism has a 40-minute adjustable vial The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads A system bag is also included Weighs 1.40 lb (0.63 kg)

The Mini Prism Monopod Kit forms a stable base with your 6000-Series Mini Prism (sold separately) The kit is easy to set up and can be used by just one person Ideal for: construction surveys, inspections, asbuilts, and many other applications Add a standard 5/8 x 11 extension to the kit to achieve heights to 4 feet Weighs 2.25 lb (1.02 kg)