Field Supplies

Trimble Adapter, SS, Monument, 1 1/2" Pipe.

Laserline GR10i 10' Direct Reading Grade Rod Optical, Feet/8ths

Two part, fixed height, 2.0 meter carbon fiber range pole with bipod and carry bag.

Trimble T10 carrying case.

Reflective Target - 3" x 3" - Yellow.

The Satellite Stick™ XL is composed of six carbon fiber sections connected by an elastic shock cord Each section measures 25 mm (1 in) diameter Sections screw together with 303 stainless steel fittings to make a rigid pole Collapses to the compact length of 37.5 cm (1.23 ft) Includes a 40-minute adjustable bubble, an elastic strap, a replaceable point, and a carrying bag Use adapter (#D11145) to increase the diameter of the pole to 1.25 inches to accommodate Claw™ series data collector pole clamps (sold separately) Weighs 2.75 lb (1.25 kg)

Suitable for: Total stations Robotic total stations Digital levels Theodolites Heavy-duty rotating lasers Features: Wooden parts made of finest European hard wood Plastic-coated wooden legs for utmost durability Large round tripod head made of aluminum, powder-coated Snap Cap Break-proof quick release levers, made of aluminum Brass hinge pins for extra stability Tripod shoes made of aluminum w/ replaceable steel points Carrying strap In accordance with ISO 12858-2-H Strapless-Go: Retract-and-go transport locking system

This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target (-30 mm offset) Two on-board 130-minute vials — top and bottom Includes replaceable plumb bob point Flo Orange Weighs 0.62 lb (0.28 kg)

The SITEGEAR 11220 leather hammer holder is made with heavy duty top grain leather for durability and maximum life. The steel hammer ring is wedged between two layers of premium leather and stitched with heavy duty nylon thread. Note: Hammer not included. Made of heavy duty custom-tanned top grain leather Edge stitching in contrasting heavy duty nylon thread for durability and maximum life Rivets are placed to secure holder Steel hammer ring wedged between two layers of premium leather Slits to fit up to 3” (76mm) belt

Designed to hold 24 inch (61 cm) stakes or rebar with a center partition Main compartment of this bag is constructed of tough Rhinotek™ material Features include hammer loop, adjustable strap and brass grommet drain holes Orange Weighs 1.70 lb (0.77 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Quick-Release cradles plug directly into Quick-Release Pole Clamps Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute vial built on to the clamp The Delrin Adapter can be purchased seperately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.38 lb (0.17 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard 1.25 inch OD rods and poles Includes Quick Release and Battery Slot Weighs 0.46 lb (0.21 kg)

Features include an outside pocket with a Velcro closure and 2 inch straps made with heavy-duty webbing Also features a Rhinotek and leather reinforced bottom Measures 10.25 x 15 inches (26 x 38 cm) Orange Weighs 1.30 lb (0.59 kg)  

The Keson NR Series Nylon-Reinforced Steel Blade with Standard Rewind is a Keson best seller! Since 1968 this style of Keson steel tape has been providing customers with accurate measurements. They are used in the harshest conditions in which people measure, and they stand to the only test that matters: field performance. We have made modifications to the housing over the years: Better plastic and molding shapes for increased durability. Double screws to hold the housing together in the event of a drop. Better blade axle to reduce breakage due to the weight of the tape if dropped. For years we’ve been honoring warranty dates long past a single year, so we are now proud to offer a limited lifetime warranty on these products. FEATURES Tough, double nylon-coated steel blades. Break-resistant under severe use in the field. 3/8-inch wide blade reduces wind drift and tape weight. Metal-reinforce crank handle for durability.

Braided mason twine doesn’t come apart even when reused. It is perfect for large jobs and everyday use. You can also nick it with a trowel and it won’t unwind. Another benefit is that braided mason line does not spin as much as a twisted line, bringing plumb bobs to rest sooner. FEATURES 18-gauge line with an approximate tensile strength of 155 pounds. 1000 feet = 1 pound.

Stainless steel housing, nylon-reinforced steel blade. The world’s best steel long tape in a housing that’s built to last. Features the strongest housing (stainless steel) on the market. Tough, double nylon-coated steel blade assures long life under field abuse. Rubbergrip shovel handle for comfortable, rapid reeling. Metal crank handle for durability. Housing is reinforced with rivets for superior strength.  

Laserline Mfg. Inc. is the world's largest manufacturer of direct reading (Lenker style) grade rods, which feature a movable tape face allowing you to set the actual benchmark elevation, or any elevation, above or below the bench into the rod. Laserline detector brackets attach to the special rail slide on laser grade rods. Made of rugged, lightweight extruded aluminum with a black anodized finish. 

Laserline Carrying / Storage Bag features sturdy black cordova nylon with strap, velcro flap and pocket for bracket and detector. 15-foot (5-meter).

Carrying case for Radio Antenna Tripod Case comes included when it is purchased with Radio Antenna Tripod (#5300-11 and 5300-12) Outside Dimensions: 8 inches x 54 inches (20.32 cm x 1.4 m) Orange

Seco Monster Gear Bag has four deep-zippered pockets – two front and two side Two interior pockets – 14 x 12 x 2 inches (35.56 x 30.48 x 5.08 cm) with hook-and-loop closures Heavy-duty nylon webbing carrying straps Enough space to carry all of your tools, clothes, or other miscellaneous gear Dimensions: 30 x 14 x 20 inches (76.2 x 35.56 x 50.8 cm) Orange Weighs 3.78 lb (1.72 kg)