Field Supplies

This 5/8 x 11 stainless steel adapter adds 23.8 mm to length of rod Weighs 0.06 lb (0.03 kg)

Bright 650-nm focused laser dot Circular vial w/ 8-minute sensitivity Standard three-prong forced centering with center lines Included is a standard 3 volt CR2 lithium battery Weighs 1.65 lb (0.75 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Adjustable 5/8 x 11 Target Height: 50 mm to 115 mm Weighs 0.29 lb (0.13 kg)

This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target Two on-board 130-minute vials — top and bottom Includes replaceable plumb bob point 0 and -30 mm Offset Flo Yellow Weighs 0.62 lb (0.28 kg)

The -30/0 mm offsets enable the Premier Prism Assembly to be used with Nikon, Topcon, Sokkia and other total stations The 62 mm copper-coated prism is encased in a heavy-duty canister with M20 threads Features a prism accuracy of <5 seconds Tilting holder is constructed of anodized aluminum Height of the prism in the holder is 100 mm and -30/0 mm offsets The mounting base features standard female 5/8 x 11 threads Target size 6 x 9 inches (15.2 x 22.8 cm) Target Colors are Flo Orange with Black Weighs 1.75 lb (0.80 kg)

The Eclipse™ prism assembly features a water-resistant, nitrogen charged, 62 mm prism canister and reversible target Can be set at a -40 mm, which offers optimal angle measurements, even when tilting in either the horizontal or the vertical axis A -30 mm adapter is included Height to center of glass: 0.38 ft (115 mm) Weighs 1.15 lb (0.52 kg)

The Mini Prism Monopod Kit forms a stable base with your 6000-Series Mini Prism (sold separately) The kit is easy to set up and can be used by just one person Ideal for: construction surveys, inspections, asbuilts, and many other applications Add a standard 5/8 x 11 extension to the kit to achieve heights to 4 feet Weighs 2.25 lb (1.02 kg)

Extends to 4.80 ft (1.5 m) and collapses to 2.26 ft (0.7 m) Dual graduations: tenths and mm increments Constructed of sturdy aluminum Quick-Release Lock and 40 minute vial Weighs 2.33 lb (1.80 kg)

Features dual grads (0.01 ft/cm), adjustable tip and TLV™ lock including 40-minute vial on the lock Extends to 5.10 ft (1.55 m) Collapses to 2.70 ft (0.82 m) Prism Height 115 cm Color: Red Weighs 2.30 lb (1.04 kg)

Aluminum pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections 2 ft (61 cm) in Length 1.25 in (32 mm) Outside Diameter Standard Yellow Weighs 1.10 lb (0.50 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: GPS Antenna Target Height: 0 mm Length: 150 mm Weighs 0.22 lb (0.10 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping Scale width graduated to fill the entire face of the rod, Measuring scale on the back side that allows for overall height readings Special molded stand-off ribs protect the scales from wear Made with strong fiberglass, which is waterproof and corrosion-resistant CR Rod series is non-conductive Perfect for laser detector mounting with no special brackets required Three section rod Collapsed length is 58.375 inches (1.48 m) Graduations in 10ths Length 13 ft Weighs 5.00 lb (2.26 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs Features a built-in circular vial in the instrument head and safety chains on the legs to prevent slipping on hard surfaces The telescopic Aluminum (Round) legs allow for setup to extend 91.2 in (2.32 m) Featuring a Quick Clamp lock and an Elevator/Round head Collapses to 4.26 ft (1.26m) Will fit in tripod carrying bag 8154-12 Black Hardware Weighs 16.30 lb (7.39 kg)

The Keson 25ft Economy Series Short tape comes with a co-molded plastic housing holds a lacquer-coated blade with easy to read marking of each eight, quarter and half inch. A side brake will slow or stop the blade return when engaged. A good tape at a very reasonable price. Width - 1". Stand out - up to 8 feet.

This bracket holds a radio antenna securely to a tripod leg The heavy-duty bracket makes plumbing the antenna easy Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately) It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection Weighs 1.55 lb (0.70 kg)

Replacement point for Mini Prism Weighs only 0.03 lb (0.01 kg)

These aluminum leveling rods are made of a light and durable alloy The telescopic sections are anodized and silk-screened with moisture-resistant ink Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side These rods are 3-Sections and come in 10ths graduations Length 9 ft Each rod includes a special level and protective bag Weighs 2.40 lb (1.10 kg)

The stylish design of the full frame Crossfire Cumulus is designed for maximum protection. The soft, rubber nose piece allows for all day comfort and the dual mold rubber temples provide grip for better stability.

Designed for all environments, the Crossfire ES5 features an adjustable nosepiece, ultralight frame, and 100% visually correct lenses. Designed for outdoor sports, the ES5 provides a polished style. The sleek framework provides substantial coverage for a variety of environments. This model is available with a polarized lens.

The 12-pound double faced sledge hammer features a 36-inch fiberglass handle. The hammer is used for general sledging operations in striking wood, concrete, metal and stone.