Seco Claw™ Cradle is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it.

Made of durable anodized aluminum for years of trouble-free use in the field. These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller.

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute Vial and Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.43 lb (0.19 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs. The telescopic Aluminum (Round) legs allow for setup to extend to 65 in (1.60 m). Features a quick clamp and a triangle/flat head tripod. Weighs 7.45 lb (3.38 kg).

This prism allows for easy determination of right angle points or perpendicular points between two targets.

SECO Double Socket Arm, 1 ", Ball + Socket. Use the Ball-and-Socket Link for your custom solution  Fits the 1-inch ram ball on cradles and clamps  Weighs 0.27 lb (0.12 kg)

The Eclipse™ prism assembly features a water-resistant, nitrogen charged, 62 mm prism canister and reversible target Can be set at a -40 mm, which offers optimal angle measurements, even when tilting in either the horizontal or the vertical axis A -30 mm adapter is included Height to center of glass: 0.38 ft (115 mm) Weighs 1.15 lb (0.52 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping Scale width graduated to fill the entire face of the rod, Measuring scale on the back side that allows for overall height readings Special molded stand-off ribs protect the scales from wear Made with strong fiberglass, which is waterproof and corrosion-resistant CR Rod series is non-conductive Perfect for laser detector mounting with no special brackets required Three section rod Collapsed length is 58.375 inches (1.48 m) Graduations in 10ths Length 13 ft Weighs 5.00 lb (2.26 kg)

Features a new shorter collapsed length 58.5 inches and a lighter weight Constructed of strong, rigid fiberglass with reinforcing ribs for added stability Waterproof and nonconductive The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant Tight locking mechanism features round buttons that resist jamming from sand and dirt Features a 1/4 x 20 female adapter in top section Dual Graduations 8ths/10ths Includes carrying case (#91411) Length 25 ft Weighs 6.00 lb (2.72 kg)

Flat shiner is 2-1/4 in (57 mm) in diameter and punched in the center with crimped edges. Shiners are used for indicating semi-permanent points with spikes or nails. Comes in a box of 250.

The Gardner Rod rest is a self-retracting ‘kickstand’ for survey rods Attaches quickly with one thumbscrew and is activated by simply pushing down a few inches on the handle Legs self-retract when the rod is lifted Made of durable anodized aluminum that won’t rust or fatigue and has a stainless steel clamp screw Holds the rod at a 20-degree zenith angle 1.25 inch Outside Diameter Weighs 1.55 lb (0.70 kg) Pole not included

This adapter adds 76.22 mm to the pole length. Use with #5187-00 GPS Quick-Release Adapter.

Female 5/8 x 11 with quick release tip. Adds 23.8 mm to length of rod.

This 5/8 x 11 stainless steel adapter adds 23.8 mm to length of rod Weighs 0.06 lb (0.03 kg)

This adapter has male 5/8 x 11 threads to Quick-Release Weighs 0.08 lb (0.04 kg)

The open clamp attachment allows quick and easy connection to the pole. Will connect to 19- and 32-mm diameter poles. The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar.

SECO Tribrach / GPS Tripod Removable Plug Adapter - Brass Center.

The Seco GPS Tripod bag features a full-length zipper and shoulder strap. Designed to carry the tripod without the point on the center pole to prevent damage to the pole.

Height of 120 mm (0.394 ft) 40-min vial Removable tip Weighs 0.40 lb (0.18 kg)

The bag holds 48inch lath and features a sturdy, adjustable shoulder strap and hand loop to carry the load.