All

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: GPS Antenna Target Height: 0 mm Length: 150 mm Weighs 0.22 lb (0.10 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Adjustable 5/8 x 11 Target Height: 50 mm to 115 mm Weighs 0.29 lb (0.13 kg)

This bracket holds a radio antenna securely to a tripod leg The heavy-duty bracket makes plumbing the antenna easy Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately) It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection Weighs 1.55 lb (0.70 kg)

Carrying case for Radio Antenna Tripod Case comes included when it is purchased with Radio Antenna Tripod (#5300-11 and 5300-12) Outside Dimensions: 8 inches x 54 inches (20.32 cm x 1.4 m) Orange

This adapts retro prisms to Swiss-style tribrachs Includes a removable Zeiss plug and locking screw Fits all tribrachs Weighs 1.75 lb (0.80 kg)

The rotating friction-top adapter allows the prism to be pointed after installation in the tribrach. Fits all tribrachs.

The Satellite Stick™ XL is composed of six carbon fiber sections connected by an elastic shock cord Each section measures 25 mm (1 in) diameter Sections screw together with 303 stainless steel fittings to make a rigid pole Collapses to the compact length of 37.5 cm (1.23 ft) Includes a 40-minute adjustable bubble, an elastic strap, a replaceable point, and a carrying bag Use adapter (#D11145) to increase the diameter of the pole to 1.25 inches to accommodate Claw™ series data collector pole clamps (sold separately) Weighs 2.75 lb (1.25 kg)

Hardened steel replacement point for most SECO tripods and prism pole points Weighs 0.06 lb (0.03 kg)

Magnet has a 3.5 inch diameters. Features a 5/8 x 11 tip. Weighs 1.17 lb (0.53 kg).

This system tilts and slides up and down pin poles Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder Site cones double as locks The prism has a 40-minute adjustable vial The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads A system bag is also included Weighs 1.40 lb (0.63 kg)

SECO Smart Phones Cradle Assembly.

This rod features a new one-piece design. Its faster to set up and more user-friendly compared to traditional two-piece, screw-together rods. Its an ideal rod for all GPS RTK surveys. Perfect for use with the any Trimble Receiver, Juniper Geode or any handheld device with an external antenna.

Features a die-cast aluminum body and an adjustable vial Fits round or rectangular rods Suitable for use with track light, robotic instruments, or conventional leveling The snap-on level fits all poles with a 1 to 1.25 inch diameter Feature a 40 minute sensitivity Weighs 0.10 lb (0.04 kg)

Comes with pockets that holds a folding ruler, a pocket with Velcro safety strap, two large marker pens, and other pens, pencils, etc. The holder is made of strong 1000D nylon which resists tears and abrasions.

The Seco Rod Level has a die-cast aluminum body and an adjustable 40-minute vial. It fits round or rectangular rods. Use with track light, robotic instruments, or conventional leveling. The snap-on level fits all poles with a 1-to-1.25-inch diameter. 

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products Weighs 0.15 lb (0.07 kg)

The SECO raised shiner is a 1-5/16-inch (33-mm) diameter disk with a raised 1-1/8-inch (29-mm) center. Includes 260 shiners per box.

This 25 foot, graduated SVR features a shorter collapsed length (58-1/2 inches) for more convenient storage. The new sleeker design also features a lighter weight. Case included.

Brackets are needed to attach laser sensors to the SVR rod Top brackets are available for all popular laser receiver models Designed for Apache Storm® Laserometer® HL700/750 Weighs 0.20 lb (0.09 kg)