877.309.4099
Contact Sales
877.309.4099
Contact Sales-
Regular price $328.93Regular priceUnit price per
SECO 25 mm Stakeout Prism Assembly / 0 and -30 mm Offset – Flo Orange
- This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target (-30 mm offset)
- Two on-board 130-minute vials — top and bottom
- Includes replaceable plumb bob point
- Flo Orange
- Weighs 0.62 lb (0.28 kg)
-
Regular price $128.00Regular priceUnit price per
SECO Claw Pole Clamp with 40-Minute Vial
- The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
- The clamping function is limited so over-tightening cannot occur
- Made of durable anodized aluminum for years of trouble-free use in the field
- These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
- Quick-Release cradles plug directly into Quick-Release Pole Clamps
- Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
- Features a 40-minute vial built on to the clamp
- The Delrin Adapter can be purchased seperately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
- Weighs 0.38 lb (0.17 kg)
-
Regular price $129.43Regular priceUnit price per
SECO Bracket with Battery Slot and Quick Release
- The original Open Clamp Pole Bracket and Cradle technology designed by SECO
- These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
- The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
- Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
- Manufactured from black anodized aluminum
- Designed for standard 1.25 inch OD rods and poles
- Includes Quick Release and Battery Slot
- Weighs 0.46 lb (0.21 kg)
-
Regular price $137.26Regular priceUnit price per
SECO Claw Pole Clamp with Compass and 40-minute Vial
- The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
- The clamping function is limited so over-tightening cannot occur
- Made of durable anodized aluminum for years of trouble-free use in the field
- These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
- Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
- Features a 40-minute Vial and Compass built on to the clamp
- The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
- Weighs 0.43 lb (0.19 kg)
-
Regular price $147.98Regular priceUnit price per
SECO 8.6 ft TLV-Style Pole (Construction Series)
- This ‘no-frills’ imported single-section pole is designed to give service in the field at a lower purchase price
- Aluminum outer and inner pole
- 40-minute level vial
- Adjustable tip
- Dual Grad (0.01 ft/cm)
- Hardened steel points
- TLV Locking mechanism
- Red and White
- 8.53 ft (2.60 m)
- Weighs 2.67 lb (1.21 kg)
-
Regular price $186.12Regular priceUnit price per
SECO 25 mm Mini Prism System with Center Vial – Flo Orange
- Here’s a versatile prism system in a small package
- The assembly features a 25 mm copper-coated prism, for fog prevention, a tilting holder, with friction axis, zero or -30 mm offset
- Powder painted Fluorescent Orange with Fluorescent Yellow targets
- Includes a 40-min adjustable circular center-mounted vial
- Assembly can mounted on a Prism pole or tribrach at three heights: 70 mm, 100 mm, 115 mm, or can be hand-held using the plumb bob bracket or with S-hook for quick attachment to plumb bob
- Also included a point for stake-out work, and a system bag with belt loop
- Weighs 0.34 lb (0.15 kg)
-
Regular price $194.08Regular priceUnit price per
SECO Tilting Triple Prism Holder
The Seco tilting triple prism holder is designed for use with one to three screw-in 62 mm canisters. Assembly is made from orange polycarbonate, four metal inserts and an aluminum yoke. Housing features a peep sight to assist with longer distances.
-
- This ‘no-frills’ imported three-section pole is designed to give service in the field at a lower purchase price
- Aluminum outer and inner pole
- 40-minute level vial
- Adjustable tip
- Dual Grad (0.01 ft/cm)
- Hardened steel points
- Twist-Lock mechanism
- Red and White
- 15.25 ft (4.65 m)
- Weighs 5.38 lb (2.44 kg)
-
Regular price $263.16Regular priceUnit price per
SECO 8.5 ft QLV Pole with Adjustable Tip – Red and White
- The Quick Lever with Vial (QLV™) allows fast, simple setups
- Easy locking
- One-section pole
- Includes a lock with 40-minute level vial
- Adjustable tip
- Dual Grad (0.01 ft/cm)
- Simple to adjust bubble and lever tension
- Powder-coated and silk screened aluminum
- Red and White
- 8.53 ft (2.60 m) extended, 4.97 ft (1.516 m) closed
- Weighs 2.95 lb (1.50 kg)
-
Regular price $419.82Regular priceUnit price per
SECO Claw Cradle Assembly for TSC5
The Claw™ is an improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
- New Claw design for the TSC5 Controller
- Made of durable machine-anodized aluminum and stainless steel construction for years of trouble-free use in the field
- Includes replaceable silicone pads that hold the controller securely
- This new design utilizes SECO’s stronger quick release that we use on heavy tablet pole brackets
- Pole Clamp fits all standard 1.25 inch diameter poles
- Pole Clamp has six tilt positions from vertical to horizontal of the display
- Assembly weighs only 0.95 lb (0.43 kg)
- Component 5200-080 (Claw Cradle) weighs 0.04 lb (0.18 kg)
- Component 5200-167 (Pole Clamp) weighs 0.55 lb (0.25 kg)
-
Regular price $344.19Regular priceUnit price per
SECO Rear Locking 62 mm Premier Prism Assembly with 5.5 x 7 inch Target – Flo Orange with Black
- Incorporates a simple stainless steel locking mechanism that’s easy to set while adjusting the prism and target tilt
- The heavy-duty 62 mm silver-coated prism is sealed in a strong canister with an ‘O’ ring to prevent water and dust from getting inside
- The prism can be mounted in either 0 or -30 mm offset positions
- Tilting axis height is 115 mm
- 5.5 x 7-inch Target size
- Target Color is Flo Orange with Black
- Weighs 1.59 lb (0.72 kg)
-
Regular price $54.03Regular priceUnit price per
SECO Anti-Rotation Quick Release 60 mm - Tip only
- Anti-rotation quick-release - Tip (for Base part #5111-04-050)
- Converts any GNSS receiver or prism with 5/8 x 11 threads to a quick release
- Heavy-duty construction, will hold up to 20 lb (9.00 kg)
- Short height, only 60 mm
- Constructed of quality stainless steel and aluminum
- Easy to operate, push button release
- TIP ONLY
- Weighs 0.35 lb (0.16 kg)
-
Sold outRegular price $91.46Regular priceUnit price per
SECO 40 Min Vial Assembly - for 1.50-inch OD Pole
- This assembly is for 1.50-inch diameter poles
- Features the 40-minute vial (#D11232)
- Includes screws
- Weighs 0.19 lb (0.09 kg)
Sold out -
- Adapt the thread size to 5/8 x 11 for mounting prisms on the leveling rod’s female adapter
- Weighs 0.20 lb (0.09 kg)
-
Regular price $340.62Regular priceUnit price per
SECO 135 mm HT, 25 mm Prism Assembly Kit
- 25 mm silver-coated prism
- -17.5 mm offset
- Adjustable 40 minute vial
- Center height is 135 mm with the Fixed Adapter (included)
- Center height is 135 mm with the Rotating Adapter (included) and Magnet (6704-002) (sold separately)
- Kit includes padded carry case
- Prism weighs 0.80 lb (0.36 kg)
- Kit weighs 1.70 lb (0.77 kg)
-
Regular price $32.30Regular priceUnit price per
SECO 265 mm HT Adapter For 230 mm Sphere
- Male and female 5/8 x 11 threads
- Physical height is 117 mm
- Center height is 265 mm with 230 mm Sphere (6704-001) and Tribrach Adapter (2070-00)
- Weighs 0.36 lb (0.16 kg)
-
- Features a male 5/8 x 11 thread
- Aluminum body
- Easy-to-replace steel point
- Weighs 0.18 lb (0.07 kg)
-
Regular price $29.75Regular priceUnit price per
SECO Aluminum Point with Replaceable Plumb Bob Point
- 3.37 inch (85.6 mm) aluminum body
- Removable point
- Weighs 0.10 lb (0.05 kg)
-
- 3.37 inch steel body, removable point
- Weighs 0.30 lb (0.14 kg)
-
- Tilting pivot allows measurement on sloped or flat pipe surfaces
- Standard topo shoe length, 3.375-inch (85.7-mm), compatible with all SECO Poles
- 2-inch (50.8-mm) diameter chrome-plated steel housing with grade-8 ceramic magnet ring
- Magnet has 40 pounds of pull force on 3/8-inch (9.5-mm) clean steel plate
- Black anodized machined 6061 aluminum body
- Machined brass pole connecter with female 5/8 x 11 threads
- Weighs 0.55 lb (0.25 kg)
