Poles

Hardened steel replacement point for most SECO tripods and prism pole points Weighs 0.06 lb (0.03 kg)

This point features an anodized aluminum body and an easy-to-replace steel point.

The SECO Wide Base Topo Shoe measures 3.37 inches in length and features a steel body that measures 2.5 inches (64 mm) outside diameter.

Features an anodized aluminum body Easy-to-replace steel point Sharp Point Weighs 0.16 lb (0.07 kg)

This range pole setup includes one 4-foot (1.2 m) sections constructed of heavy-duty 1-1/8-inch (29 mm) aluminum. The sections are electrostaticly powder-coated white and orange. One 4 foot section with an outside diameter of 1.13 in (29 mm). Includes Carrying Bag.

Trimble 60mm Reflective Retro Target (10 pack).

This combo allows easy conversions from “control” to “topo” surveys The quick-release pin and matched drill holes are the key Aluminum point weighs 0.15 lb (0.07 kg) Aluminum topo shoe weighs 0.20 lb (0.09 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms Converts a robotics pole to a GPS pole Weighs 0.26 lb (0.12 kg)

Level Vial assembly fits most 8ft & 12ft Prism Rods Assembly is for 1.25-inch diameter poles Featuring a 40-minute vial (#D11242) Top Adjusted Vial Holder Assembly Includes screws Weighs 0.14 lb (0.06 kg)

This ‘no-frills’ imported single-section pole is designed to give service in the field at a lower purchase price Aluminum outer and inner pole 40-minute level vial Adjustable tip Dual Grad (0.01 ft/cm) Hardened steel points TLV Locking mechanism Red and White 8.53 ft (2.60 m) Weighs 2.67 lb (1.21 kg)

These carbon fiber telescoping poles are graduated to read direct for a 135 mm prism height Adapters will achieve other prism heights Features include a stainless steel pin which locks the inner pole Holes are spaced every 0.5 ft Poles include the popular TLV™ lock which has a 40-minute vial built-in Inner poles have dual graduations: centimeters and 0.01 ft This pole telescopes to 8.53 ft (2.60 m) and collapses to 4.97 ft (1.52 m). Weighs 2.30 lb (1.04 kg)

Contains 5 pieces of 60*60mm reflective foil target stickers with wider sighting marks. Only suitable for manual aiming. Prism Constant: 0mm.

The Standard Prism Assembly features a copper-coated, canister-type 62 mm prism, simple but proven locking and 5.5 x 7 inch target It’s waterproof, has a M20 universal mounting thread and the tilting axis height is 115 mm Prism can be mounted in either 0 or -30 mm offset positions Target Colors are Flo Orange with Black Weighs 1.35 lb (0.62 kg)

Wear-resistant for long life 3-section pole The soft rubber knob is easy to tighten or loosen, even when wearing gloves Features a twisting lock and a 40 minute vial on the pole Dual Grad (0.01 ft/cm) Adjustable Tip Powder-coated and silk screened aluminum Red and White 15.25 ft (4.65 m) extended, 5.41 ft (1.65 m) closed Weighs 7.60 lb (3.45 kg)

Trimble 2.5m Telescopic Range Pole with markings read to the top of the pole. Carbon fiber and aluminium telescopic range pole - 2.5 meter.

Trimble 2.5m Telescopic Range Pole with Bipod with markings read to the top of the pole. Carbon fiber and aluminium telescopic range pole - 2.5 meter, with bipod and carry bag.

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute Vial and Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.43 lb (0.19 kg)

The Aluminum pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections 1 in (25 mm) Outside Diameter 6 in (15.2 cm) in Length Weighs 0.50 lb (0.23 kg)

The Trimble Traverse Kit contains case, traverse prism, prism base with level and tribrach with no optical plummet. The prism base with level has a lever arm with bottom of notch measurement that enables accurate height measurements and removes the need to remeasure when pairing with an S Series instrument.

Designed so the GPS surveyor has all the features needed in a single rod, they’re ideal for kinematic surveys Zero height (0 H.T.) Carbon fiber makes these rods 30% lighter The included pin can lock the length of the rod at 1.8 m, 2 m, 2.2 m TLV™ locks with 40-minute vials are standard Metric Graduations (cm) Length 4.48 ft – 8.14 ft (1.4 m – 2.5 m) Weighs 2.27 lb (1.03 kg)